Recording time code following the one last recorded on the tape
Setting
Set the TC/UB/CLOCK [1/2] Menu as follows.
TCG SELECT : REGEN
NDF/DF [60] : No setting required. The framing mode will match the tape. (U model only)
Operation
1.Insert a tape with time codes recorded.
2.Set
3.Press the PLAY button to go to the RECORDING mode. Time codes will be recorded on the tape, starting from where it stopped at last recording.
The counter mode display shows either TCR or UBR.
TC/UB/CLOCK [1/2] Menu screen
– – – T C / U B / C L O C K [ 1 / 2 ] – – –
T C G S E L E C T | R E G E N | |
N D F / D F [ 6 0 ] | D R O P | |
D F B I T [ 5 0 ] | O N | |
T C D U P L I . : D V | O F F | |
T C O F F S E T | O F F | |
N E X T | P A G E |
|
P A G E | B A C K |
|
Recording time code, input to the IEEE1394 terminal (In DV mode only)
Setting
Set the INPUT SELECT switch on the front panel to HDV/DV.
Set TC DUPLI.: DV in the TC/UB/CLOCK [1/2] Menu screen to AUTO.
*To record the time code from a
Operation
1.Check the time code of the IEEE1394 terminal.
Press the REC button when
The counter mode display shows DTCG or DUBG.
2.Select the RECORDING mode.
Record time codes from the IEEE1394 terminal.
Memo
For date/time also, data from the IEEE1394 terminal are recorded.
TC/UB/CLOCK [1/2] Menu screen
– – – T C / U B / C L O C K [ 1 / 2 ] – – –
T C G S E L E C T | P R E S E T | |
N D F / D F [ 6 0 ] | D R O P | |
D F B I T [ 5 0 ] | O N | |
T C D U P L I . : D V | A U T O | |
T C O F F S E T | O F F | |
N E X T | P A G E |
|
P A G E | B A C K |
|