JVC BR-HD50E Playing back the time code, Select the time code data to display, Counter switch

TIME CODE

Playing back the time code

BR-HD50 is also equipped with a time code reader. During playback, the time code or user’s bit data recorded on the tape is displayed on the monitor or the counter display.

	COUNTER switch
1. Select the time code data to display.	Monitor (Status display)

Set the COUNTER switch to “TC” or “UB”.

2.Press the PLAY button to go to the PLAYBACK mode.

It displays the time code and the user’s bit on the monitor or the counter display. The counter display mode becomes TCR or UBR.

Caution on time code playback

zDuring playback, if a portion of tape without recorded time code runs through, the time code stops running. Playback con- tinues.

zIf tapes without recorded user’s bit, e.g. those recorded with a home-use DV VCR, are played back on BR-HD50, “– –” is dis- played.

D V 3 2 K C H – 1 / 2				S P	6 0 M I N
	WA R N I N G		7 0 0	1
	D R UM MO T O R F A I L U R E
	R E C	I N H I B I T
0 6 / 1 0 / 0 5					P L A Y
1 1 : 2 0 : 0 0		T C R	0 2 : 0 0 : 0 0 : 0 0

Time code or user’s bit

E-62