JVC BR-HD50E AIEEE1394 IEEE1394 terminal 6P, BDC power input terminal, CDC power cord clamp

Page 22

NAMES AND FUNCTIONS OF PARTS

Rear panel (continued)

d

c b a e

a[IEEE1394] IEEE1394 terminal (6P)

This is the input/output terminal for IEEE1394- compliant digital signals.

Inputs HDV signals or DV signals when recording. Digital audio is input simulta- neously.

During playback, it outputs HDV signals, DV signals, and digital audio on the playback tape. Upon analog signal input, EE images and EE audio are output. EE images are DV format signals (480i or 576i) (Only when IEEE1394 switch is set to DV).

•This unit records and plays 720p format HDV signals.

720p HDV signals and DV signals from this terminal are recorded as is, without format conversion.

•To enable signal input via this terminal, set the INPUT SELECT switch located on the front panel to “HDV/DV”.

•The IEEE1394 switch located on the front panel must be set to “HDV” or “DV”, accord- ing to the input signal to this terminal or the video format of the playback tape.

•The audio mode (48 kHz or 32 kHz) cannot be changed for the input audio signal via this terminal. It will be recorded using the input signal audio mode. 4-channel record- ing is possible in the 32 kHz audio mode.

•Power cannot be supplied via this terminal.

g

hf

•To record a time code via this terminal, set TC DUPLI.: DV in the TC/UB/CLOCK [1/2] Menu screen to AUTO or NONDROP. (In DV mode only)

•To control this unit via this terminal, set REM SEL HDV/DV in the REMOTE [1/2] Menu screen to ON or LOC/REM.

Note

If HDV/DV signals are not input/output when the IEEE1394 cable is connected, check whether the signal format matches the IEEE1394 switch set- ting on the front panel. If the settings match, either reconnect the IEEE1394 cable, or reset the power to the unit.

bDC power input terminal

This terminal is for inputting DC 12 V. Connect the DC power cord of the supplied AC adapter.

Memo

zWhen power is supplied to this terminal, the OPERATE indicator located on the front panel lights up. (The indicator turns red when BR- HD50 is in the OPERATE OFF state)

zWhether to set BR-HD50 to enter the OPER- ATE ON mode or OPERATE OFF mode when power is supplied to the terminal can be selected with DC IN MODE in the SYSTEM [2/ 2] Menu screen.

cDC power cord clamp

Use this clamp to fasten the DC power cord.

d[SIGNAL GND] terminal

This is the grounding terminal for signals.

E-18

Image 22

Contents BR-HD50 For Customer UseImportant Safeguards Remarque InformationInformation for Canada Renseignement Pour Canada European Union Port Cable LengthBusiness users Other Countries outside the European Union Must be Earthed Power SystemFor Your Safety Please Read the Following Text Carefully For Continental EUROPE, ETC For U.K. onlyCompatible with DV format Compatible with 60Hz/50Hz HD signal for- matHDV 720p format Compatible mechanism for standard/mini DV cassettesTable of Contents Introduction Remarks of usageStandard DV cas- z Mini DV cassettes settes Cassette tape„ Erasure prevention LA-DV276M-DV63PRO LA-DV186M-DV63HD LA-DV124„ HD signal format „ HDV and DV signal input/outputHDV and DV format „ Recording time „ HDV 720p and DV format„ HD video output „ Regular maintenance Regular maintenance„ Head cleaning Operating environ Cleaning tapeCondensation Ment2OPERATE button/LED Names and Functions of Parts1Cassette loading slot/LED 3EJECT button„ FF button/LED „ Play button/LED„ Pause button/LED „ Stop button/LED5REMOTE/LOCAL switch 6INPUT Select switch 7COUNTER switch„ 60 indicator light 8IEEE1394 IEEE1394 terminal switch„ Dvcam indicator light „ 50 indicator lightSetting screens FRESET buttonHSpecial functions/Setting buttons EMENU button„ SEARCH-/Q button „ BLANK/P button„ SEARCH+/S button „ SET button3VIDEO Line OUT terminal BNC 2VIDEO Y/C in terminal 4-PINRear panel 6CH1 Audio in terminal RCA 0HDMI OUT Hdmi signal output termi- nal5COMPONENT OUT Component sig- nal output terminal BNC×3 7CH2 Audio in terminal RCADSIGNAL GND terminal BDC power input terminalCDC power cord clamp AIEEE1394 IEEE1394 terminal 6PGFan ESERIAL Remote terminal mini jackFREMOTE RS-422A terminal D-SUB 9P HSlot cover for servicingON-SCREEN Display Sampling frequency/audio „ DV format„ HDV format Output CHIt displays the date and time Hrmmss When the unit is in the Analog/HDV Signal RecordingDate/time Or Stop mode, it displays the data of the built-in clockCounter display VCR operation modeRemaining tape Display displayed for about 3 seconds Description Event/Alarm displayDisplay displayed during operation Description Display DescriptionNo HDV/DV SIG Invalid TapeLP Tape NAL Copy Inhibit„ Input signal Connection„ Output signal Audio in terminal RCA×2 Connect an audio cable Connecting audio signalsDigital input IEEE1394 terminal 6P Attaching the supplied ferrite core „ Operate BR-HD50 with the wired remote controller Connecting with Serial Remote terminalsTo the DC cord. XPage Component OUT RECORDING/OUTPUT Signal FormatInputting analog signal ModelHdmi OUT terminal Line OUT terminal Inputting digital signalHD signal Input HDVPlayback „ Output terminal video/audio signal format during playbackVideo HD signal IEEE1394 Hdmi OUT terminalPreparation Turning on the powerTurning off the power „ Turn off BR-HD50„ Setting the REMOTE/LOCAL switch Selecting the operating method main unit/remote controllerOperation Lock mode „ Turning on the Operation Lock modeLoading the cassette tape Ejecting the cassette tapeSetting the date and time in the Clock Adjust Menu screen Setting date and timeSetting/Displaying date and time TC/UB/CLOCK 2/2 Menu screenOn-screen status display Selecting date/time display„ Display Menu screen Selecting HD signal format Check settingsSetting the Menu screen Display the System 2/2 Menu screenSetting Menu screens Recording„ Settings for digital video format Selecting input signal„ Selecting digital input signal Settings for digital signal input„ Setting System Menu screen Setting related Menu screen„ Settings for recording the time code Adjusting audio recording level SettingsAdjusting audio recording level „ Increasing the recording level„ Adjusting the CH2 channel „ Adjusting the CH1 channelAudio recording level is fixed to the initial setting value Recording index signals OFF „ For using GY-DV5000/DV5100 as the source unitNo backup recording Recording begins on the source unitRemote 1/2 Menu screen Recording with Serial Remote terminalsRemote SEL SER Remote 2/2 Menu screenVideo settings PlaybackAudio settings Settings regarding playback functionFast forward/rewind Special playback functions Frame-advance playback„ STL/F. ADV DV in the System 1/2 Menu screen System 1/2 Menu screen„ DV recorded tape playback Slow playback and Search modeSet BR-HD50 to the Playback or the Still mode „ HDV recorded tape playback„ In the Stop mode, press the Blank button Index searchBlank search Search functionIndex repeat playback „ Repeat Mode in the System 1/2 Menu screenRepeat playback If the head is dirty, repeat play- back may not work wellClearing registered cue-up points For details on time code setting and recording XPageRegistering cue-up points Multi cue-upSearching cue-up points Changing cue-up pointsExiting the Multi Cue-up screen 2Press the R or P button again to change the time- codeDuring DV input Time CodeDisplaying the time code Checking the data of time code generatorSetting ...TC/UB/CLOCK 1/2 Menu screen „ Set TCG Select to PresetPresetting the time code Setting is preset to the time code generatorPreset time code Recording from preset dataTCG Select Preset „ Set the TC/UB/CLOCK 1/2 Menu as followsTCG Select Regen Counter mode display shows either TCR or UBRSelect the Recording mode Check the time code of the IEEE1394 terminalCounter switch Set the Counter switch to TC or UBPress the Play button to go to the Playback mode Playing back the time codeEdit Control with RS-422A Analog signalsControl with the IEEE1394 ter- minal Digital signals „ Remote 2/2 Menu screenMenu Screens „ Set BR-HD50 to the Stop or Still modeSetting the menus TOP Menu screenSetting Counter display shows menu code numbers when setting menusNo settings are selected yet Setting on the monitor display is flashingStructure of the Menu screens System 1/2 menuSystem Menu screens TOP Menu screen„ System 1/2 Menu screens 1MIN Repeat ModeLong Pause 3MIN„ System 2/2 Menu Remote Menu screens REM Stop SEL DelayREM FF/REW PB StartAudio Menu Screen Select Video Menu ScreenMonitor OUT FormatDown Conv OUT forLetter UP Conv Hdmi ModeTest Signal DVI ColorTC/UB/CLOCK Menu screens „ TC/UB/CLOCK 1/2 Menu screenClock Adjust„ TC/UB/CLOCK 2/2 Menu screen Date MM/DD/YYDisplay Menu screen „ Alarm display Displayed regardless of the Display mode Others„ Warning display Displayed regardless of the Display mode Recorded during DV signal input Troubleshooting Symptom Action No powerAfter the REMOTE/LOCAL switch Unable to recordHdmi OUT or Component OUT No HD signal is output fromNo signal is output from Display on the monitorSystem 1/2 Menu screen is displayed „ Set BR-HD50 to the Stop modeChecking the hour meter Press the Menu button to return to the normal screen„ General „ Connectors„ Accessories „ Video„ External dimensions Unit mm „ AC adapter section Important Safety InstructionsSupplement