JVC BR-HD50E For using GY-DV5000/DV5100 as the source unit, Off, No backup recording

Page 51

RECORDING

Backup recording function

In combination with DV equipment, BR-HD50 can perform continuous, long-hour recording.

BR-HD50 can be set as the backup unit connected to a DVcamcorder (GY-DV300/DV500/DV550/ DV5000, etc.). When the recording tape of the source unit nears its end, BR-HD50 can start recording, enabling long-hour recording.

Backup unit: BR-HD50

IEEE1394 cable

	DV terminal	IEEE1394
	DV terminal	terminal
		terminal

INPUT SELECT switch

REMOTE/LOCAL switch

Connection

Connect the DV terminal of the source unit to the IEEE1394 terminal of BR-HD50 with an IEEE1394 cable.

Setting up BR-HD50

Set the INPUT SELECT switch on the front panel to “HDV/DV”.

Set the REMOTE/LOCAL switch on the front panel to “REMOTE”.

Set BACKUP REC: DV in the SYSTEM [1/2] Menu screen.

Use the following settings according to the

tape length of the source unit.

*For DV or mini DV cassette tape: 25MIN : 30-minute tape

55MIN : 60-minute tape

75MIN : 80-minute tape

115MIN : 120-minute tape

175MIN : 180-minute tape

265MIN : 270-minute tape

OFF	: No backup recording

Set the REM SEL HDV/DV in the RE- MOTE [1/2] Menu screen to ON or LOC+REM.

Set TC DUPLI.: DV in the TC/UB/CLOCK [1/2] Menu screen to OFF.

•It records the data of the built-in time code generator.

•When TC DUPLI.: DV is set to AUTO or NON DROP, the time code of the DV cam- corder will stop advancing. If the DV cable is disconnected, the time code of the backup recording will stop advancing.

For using GY-DV5000/DV5100 as the source unit

Set DV REC TRIGGER in the OTHERS [1/2] Menu screen of GY-DV5000/DV5100 to OFF.

Operation

1.Recording begins on the source unit.

*Ensure that recording starts from the begin- ning of the recording tape.

2.BR-HD50 begins recording when the tape of the source unit nears its end (about 5 min- utes before the end of the tape).

• BR-HD50 begins recording when the record- ing time of the source unit reaches the time set by BACKUP REC: DV.

Memo

zIn backup recording, BR-HD50 records video/ sound from the source unit.

While this unit is performing backup recording, continue shooting from the source unit.

zThe audio mode is the one selected in the source unit. (32 K/48 K)

zSet BACKUP REC: DV to “OFF” if the unit is not performing backup recording.

E-47

Image 51

Contents For Customer Use BR-HD50Important Safeguards Information RemarqueInformation for Canada Renseignement Pour Canada Port Cable Length European UnionBusiness users Other Countries outside the European Union For Continental EUROPE, ETC For U.K. only Power SystemFor Your Safety Please Read the Following Text Carefully Must be EarthedCompatible mechanism for standard/mini DV cassettes Compatible with 60Hz/50Hz HD signal for- matHDV 720p format Compatible with DV formatTable of Contents Remarks of usage IntroductionLA-DV276M-DV63PRO LA-DV186M-DV63HD LA-DV124 Cassette tape„ Erasure prevention Standard DV cas- z Mini DV cassettes settes„ HDV and DV signal input/output „ HD signal formatHDV and DV format „ HDV 720p and DV format „ Recording time„ HD video output Regular maintenance „ Regular maintenance„ Head cleaning Ment Cleaning tapeCondensation Operating environ3EJECT button Names and Functions of Parts1Cassette loading slot/LED 2OPERATE button/LED„ Stop button/LED „ Play button/LED„ Pause button/LED „ FF button/LED7COUNTER switch 5REMOTE/LOCAL switch 6INPUT Select switch„ 50 indicator light 8IEEE1394 IEEE1394 terminal switch„ Dvcam indicator light „ 60 indicator lightEMENU button FRESET buttonHSpecial functions/Setting buttons Setting screens„ SET button „ BLANK/P button„ SEARCH+/S button „ SEARCH-/Q button2VIDEO Y/C in terminal 4-PIN 3VIDEO Line OUT terminal BNCRear panel 7CH2 Audio in terminal RCA 0HDMI OUT Hdmi signal output termi- nal5COMPONENT OUT Component sig- nal output terminal BNC×3 6CH1 Audio in terminal RCAAIEEE1394 IEEE1394 terminal 6P BDC power input terminalCDC power cord clamp DSIGNAL GND terminalHSlot cover for servicing ESERIAL Remote terminal mini jackFREMOTE RS-422A terminal D-SUB 9P GFanON-SCREEN Display Output CH „ DV format„ HDV format Sampling frequency/audioOr Stop mode, it displays the data of the built-in clock When the unit is in the Analog/HDV Signal RecordingDate/time It displays the date and time HrmmssVCR operation mode Counter displayRemaining tape Display Description Event/Alarm displayDisplay displayed during operation Description Display displayed for about 3 seconds DescriptionNAL Copy Inhibit Invalid TapeLP Tape No HDV/DV SIGConnection „ Input signal„ Output signal Connecting audio signals Audio in terminal RCA×2 Connect an audio cableDigital input IEEE1394 terminal 6P Attaching the supplied ferrite core Connecting with Serial Remote terminals „ Operate BR-HD50 with the wired remote controllerTo the DC cord. XPage Model RECORDING/OUTPUT Signal FormatInputting analog signal Component OUTHDV Inputting digital signalHD signal Input Hdmi OUT terminal Line OUT terminalIEEE1394 Hdmi OUT terminal „ Output terminal video/audio signal format during playbackVideo HD signal Playback„ Turn off BR-HD50 Turning on the powerTurning off the power Preparation„ Turning on the Operation Lock mode Selecting the operating method main unit/remote controllerOperation Lock mode „ Setting the REMOTE/LOCAL switchEjecting the cassette tape Loading the cassette tapeTC/UB/CLOCK 2/2 Menu screen Setting date and timeSetting/Displaying date and time Setting the date and time in the Clock Adjust Menu screenSelecting date/time display On-screen status display„ Display Menu screen Display the System 2/2 Menu screen Check settingsSetting the Menu screen Selecting HD signal formatRecording Setting Menu screensSettings for digital signal input Selecting input signal„ Selecting digital input signal „ Settings for digital video formatSetting related Menu screen „ Setting System Menu screen„ Settings for recording the time code „ Increasing the recording level SettingsAdjusting audio recording level Adjusting audio recording level„ Adjusting the CH1 channel „ Adjusting the CH2 channelAudio recording level is fixed to the initial setting value Recording index signals Recording begins on the source unit „ For using GY-DV5000/DV5100 as the source unitNo backup recording OFFRemote 2/2 Menu screen Recording with Serial Remote terminalsRemote SEL SER Remote 1/2 Menu screenPlayback Video settingsSettings regarding playback function Audio settingsFast forward/rewind System 1/2 Menu screen Frame-advance playback„ STL/F. ADV DV in the System 1/2 Menu screen Special playback functions„ HDV recorded tape playback Slow playback and Search modeSet BR-HD50 to the Playback or the Still mode „ DV recorded tape playbackSearch function Index searchBlank search „ In the Stop mode, press the Blank buttonIf the head is dirty, repeat play- back may not work well „ Repeat Mode in the System 1/2 Menu screenRepeat playback Index repeat playbackMulti cue-up For details on time code setting and recording XPageRegistering cue-up points Clearing registered cue-up points2Press the R or P button again to change the time- code Changing cue-up pointsExiting the Multi Cue-up screen Searching cue-up pointsChecking the data of time code generator Time CodeDisplaying the time code During DV inputSetting is preset to the time code generator „ Set TCG Select to PresetPresetting the time code Setting ...TC/UB/CLOCK 1/2 Menu screen„ Set the TC/UB/CLOCK 1/2 Menu as follows Recording from preset dataTCG Select Preset Preset time codeCheck the time code of the IEEE1394 terminal Counter mode display shows either TCR or UBRSelect the Recording mode TCG Select RegenPlaying back the time code Set the Counter switch to TC or UBPress the Play button to go to the Playback mode Counter switch„ Remote 2/2 Menu screen Control with RS-422A Analog signalsControl with the IEEE1394 ter- minal Digital signals EditTOP Menu screen „ Set BR-HD50 to the Stop or Still modeSetting the menus Menu ScreensSetting on the monitor display is flashing Counter display shows menu code numbers when setting menusNo settings are selected yet SettingSystem 1/2 menu Structure of the Menu screensTOP Menu screen System Menu screens„ System 1/2 Menu screens 3MIN Repeat ModeLong Pause 1MIN„ System 2/2 Menu Remote Menu screens PB Start DelayREM FF/REW REM Stop SELAudio Menu Screen OUT Format Video Menu ScreenMonitor SelectOUT for Down ConvLetter DVI Color Hdmi ModeTest Signal UP Conv„ TC/UB/CLOCK 1/2 Menu screen TC/UB/CLOCK Menu screensDate MM/DD/YY Adjust„ TC/UB/CLOCK 2/2 Menu screen ClockDisplay Menu screen Others „ Alarm display Displayed regardless of the Display mode„ Warning display Displayed regardless of the Display mode Unable to record Troubleshooting Symptom Action No powerAfter the REMOTE/LOCAL switch Recorded during DV signal inputDisplay on the monitor No HD signal is output fromNo signal is output from Hdmi OUT or Component OUTPress the Menu button to return to the normal screen „ Set BR-HD50 to the Stop modeChecking the hour meter System 1/2 Menu screen is displayed„ Video „ Connectors„ Accessories „ General„ External dimensions Unit mm Important Safety Instructions „ AC adapter sectionSupplement