JVC BR-HD50E Names and Functions of Parts, 1Cassette loading slot/LED, 2OPERATE button/LED

Page 14

NAMES AND FUNCTIONS OF PARTS

Front panel

2	1
	3

4

1Cassette loading slot/LED

•For loading a cassette into or unloading it from the slot.

Insert a standard DV cassette or a mini DV cassette. (XPage 37)

•When BR-HD50 is in the OPERATE OFF state and a cassette is loaded, it changes to the OPERATE ON state.

•With a cassette loaded, the LED lights up in green.

When a cassette is being loaded or ejected, the LED flashes.

2[OPERATE] button/LED

•Press this button to turn on the power and BR- HD50 becomes ready for operation.

(OPERATE ON)

Press this button again when BR-HD50 is already on to turn off the power. (OPERATE OFF)

•OPERATE LED lights up as follows.

OPERATE ON	: the green LED lights up
OPERATE OFF : the red LED lights up
VCR error	: the red LED blinks

Memo

zIf DC IN MODE in the SYSTEM [2/2] Menu screen is set to “OPE ON”, and power is sup- plied to the DC IN terminal on the rear panel, power is turned on and the unit enters OPER- ATE ON mode without pressing this button.

zEven after the power is turned off with this but- ton, BR-HD50 is live with a small amount of electricity.

Therefore, if BR-HD50 is not to be used for a long period of time, please remove the AC adapter to save energy.

3[EJECT] button

• Press this button to eject the cassette.

Memo

zIt takes about 6 seconds for the cassette to be ejected.

zThe cassette can be ejected even when BR- HD50 is in the OPERATE OFF mode. After the eject action is completed, BR-HD50 returns to the OPERATE OFF mode.

4Operation buttons

[REC] button/LED

•Hold down this button and press the PLAY button to start recording. During recording, the red LED lights up.

•Hold down this button and press the PAUSE button to pause recording.

•If this button is pressed during recording, an index signal is recorded on the tape (when INDEX WRITE in the SYSTEM [2/2] Menu screen is set to ON).

•When this button is pressed in the STOP mode, the time code generator value can be checked while the button is being held down. If TC DUPLI.: DV Menu is set to AUTO, the time code, date and time of the IEEE1394 terminal can be checked. (In DV mode only)

E-10

Image 14

Contents BR-HD50 For Customer UseImportant Safeguards Information for Canada Renseignement Pour Canada InformationRemarque Business users Other Countries outside the European Union Port Cable LengthEuropean Union Must be Earthed Power SystemFor Your Safety Please Read the Following Text Carefully For Continental EUROPE, ETC For U.K. onlyCompatible with DV format Compatible with 60Hz/50Hz HD signal for- matHDV 720p format Compatible mechanism for standard/mini DV cassettesTable of Contents Introduction Remarks of usageStandard DV cas- z Mini DV cassettes settes Cassette tape„ Erasure prevention LA-DV276M-DV63PRO LA-DV186M-DV63HD LA-DV124HDV and DV format „ HDV and DV signal input/output„ HD signal format „ HD video output „ HDV 720p and DV format„ Recording time „ Head cleaning Regular maintenance„ Regular maintenance Operating environ Cleaning tapeCondensation Ment2OPERATE button/LED Names and Functions of Parts1Cassette loading slot/LED 3EJECT button„ FF button/LED „ Play button/LED„ Pause button/LED „ Stop button/LED5REMOTE/LOCAL switch 6INPUT Select switch 7COUNTER switch„ 60 indicator light 8IEEE1394 IEEE1394 terminal switch„ Dvcam indicator light „ 50 indicator lightSetting screens FRESET buttonHSpecial functions/Setting buttons EMENU button„ SEARCH-/Q button „ BLANK/P button„ SEARCH+/S button „ SET buttonRear panel 2VIDEO Y/C in terminal 4-PIN3VIDEO Line OUT terminal BNC 6CH1 Audio in terminal RCA 0HDMI OUT Hdmi signal output termi- nal5COMPONENT OUT Component sig- nal output terminal BNC×3 7CH2 Audio in terminal RCADSIGNAL GND terminal BDC power input terminalCDC power cord clamp AIEEE1394 IEEE1394 terminal 6PGFan ESERIAL Remote terminal mini jackFREMOTE RS-422A terminal D-SUB 9P HSlot cover for servicingON-SCREEN Display Sampling frequency/audio „ DV format„ HDV format Output CHIt displays the date and time Hrmmss When the unit is in the Analog/HDV Signal RecordingDate/time Or Stop mode, it displays the data of the built-in clockRemaining tape VCR operation modeCounter display Display displayed for about 3 seconds Description Event/Alarm displayDisplay displayed during operation Description Display DescriptionNo HDV/DV SIG Invalid TapeLP Tape NAL Copy Inhibit„ Input signal Connection„ Output signal Digital input IEEE1394 terminal 6P Connecting audio signalsAudio in terminal RCA×2 Connect an audio cable Attaching the supplied ferrite core „ Operate BR-HD50 with the wired remote controller Connecting with Serial Remote terminalsTo the DC cord. XPage Component OUT RECORDING/OUTPUT Signal FormatInputting analog signal ModelHdmi OUT terminal Line OUT terminal Inputting digital signalHD signal Input HDVPlayback „ Output terminal video/audio signal format during playbackVideo HD signal IEEE1394 Hdmi OUT terminalPreparation Turning on the powerTurning off the power „ Turn off BR-HD50„ Setting the REMOTE/LOCAL switch Selecting the operating method main unit/remote controllerOperation Lock mode „ Turning on the Operation Lock modeLoading the cassette tape Ejecting the cassette tapeSetting the date and time in the Clock Adjust Menu screen Setting date and timeSetting/Displaying date and time TC/UB/CLOCK 2/2 Menu screen„ Display Menu screen Selecting date/time displayOn-screen status display Selecting HD signal format Check settingsSetting the Menu screen Display the System 2/2 Menu screenSetting Menu screens Recording„ Settings for digital video format Selecting input signal„ Selecting digital input signal Settings for digital signal input„ Settings for recording the time code Setting related Menu screen„ Setting System Menu screen Adjusting audio recording level SettingsAdjusting audio recording level „ Increasing the recording levelAudio recording level is fixed to the initial setting value „ Adjusting the CH1 channel„ Adjusting the CH2 channel Recording index signals OFF „ For using GY-DV5000/DV5100 as the source unitNo backup recording Recording begins on the source unitRemote 1/2 Menu screen Recording with Serial Remote terminalsRemote SEL SER Remote 2/2 Menu screenVideo settings PlaybackAudio settings Settings regarding playback functionFast forward/rewind Special playback functions Frame-advance playback„ STL/F. ADV DV in the System 1/2 Menu screen System 1/2 Menu screen„ DV recorded tape playback Slow playback and Search modeSet BR-HD50 to the Playback or the Still mode „ HDV recorded tape playback„ In the Stop mode, press the Blank button Index searchBlank search Search functionIndex repeat playback „ Repeat Mode in the System 1/2 Menu screenRepeat playback If the head is dirty, repeat play- back may not work wellClearing registered cue-up points For details on time code setting and recording XPageRegistering cue-up points Multi cue-upSearching cue-up points Changing cue-up pointsExiting the Multi Cue-up screen 2Press the R or P button again to change the time- codeDuring DV input Time CodeDisplaying the time code Checking the data of time code generatorSetting ...TC/UB/CLOCK 1/2 Menu screen „ Set TCG Select to PresetPresetting the time code Setting is preset to the time code generatorPreset time code Recording from preset dataTCG Select Preset „ Set the TC/UB/CLOCK 1/2 Menu as followsTCG Select Regen Counter mode display shows either TCR or UBRSelect the Recording mode Check the time code of the IEEE1394 terminalCounter switch Set the Counter switch to TC or UBPress the Play button to go to the Playback mode Playing back the time codeEdit Control with RS-422A Analog signalsControl with the IEEE1394 ter- minal Digital signals „ Remote 2/2 Menu screenMenu Screens „ Set BR-HD50 to the Stop or Still modeSetting the menus TOP Menu screenSetting Counter display shows menu code numbers when setting menusNo settings are selected yet Setting on the monitor display is flashingStructure of the Menu screens System 1/2 menu„ System 1/2 Menu screens TOP Menu screenSystem Menu screens 1MIN Repeat ModeLong Pause 3MIN„ System 2/2 Menu Remote Menu screens REM Stop SEL DelayREM FF/REW PB StartAudio Menu Screen Select Video Menu ScreenMonitor OUT FormatLetter OUT forDown Conv UP Conv Hdmi ModeTest Signal DVI ColorTC/UB/CLOCK Menu screens „ TC/UB/CLOCK 1/2 Menu screenClock Adjust„ TC/UB/CLOCK 2/2 Menu screen Date MM/DD/YYDisplay Menu screen „ Alarm display Displayed regardless of the Display mode Others„ Warning display Displayed regardless of the Display mode Recorded during DV signal input Troubleshooting Symptom Action No powerAfter the REMOTE/LOCAL switch Unable to recordHdmi OUT or Component OUT No HD signal is output fromNo signal is output from Display on the monitorSystem 1/2 Menu screen is displayed „ Set BR-HD50 to the Stop modeChecking the hour meter Press the Menu button to return to the normal screen„ General „ Connectors„ Accessories „ Video„ External dimensions Unit mm Supplement Important Safety Instructions„ AC adapter section