JVC BR-HD50E Changing cue-up points, Exiting the Multi Cue-up screen, Searching cue-up points

Changing cue-up points

1Press the R or P button to bring the cursor to the cue-up point to be changed. Press the S button.

The hour digits of the registered time code display blink. Press the S button to select the digit to be changed.

2Press the R or P button again to change the time- code.

Press the R button to increase the time code data. Press the P button to decrease the time code data.

3Press the SET button to register the changed time code.

If no time code is to be registered, do not press the SET button. Instead, press the Q button to make the blinking time code dis- play disappear.

Exiting the Multi Cue-up screen

Press the R or P button to bring the cursor to EXIT. Press the SET button.

The display of the monitor returns to the normal screen.

SET button

Rbutton

Q button S button

Pbutton

Memo

If the COUNTER switch is set to CTL or UB while the Multi Cue-up screen is being dis- played, the display returns to the normal screen.

Searching cue-up points

1.Set the COUNTER switch to TC.

2.Press the CUE UP button when the normal screen is dis- played.

The Multi Cue-up screen appears on the monitor.

3.Press the R or P button to bring the cursor to the cue- up point to be searched.

4.Press the CUE UP button.

The cue-up operation for the selected point is performed.

Rbutton

Cue-up point

P button

CUE UP button

– – – M U L T I C U E U P – – – – – –

C U E I	0 0	: 0 1	: 3 5 : 1 1
C U E 2	0 3	: 4 2	: 5 9	: 2 1
C U E 3	– – : – –		: – – : – –
C U E 4	1 1	: 2 1	: 4 8	: 0 7
C U E 5	– – : – –		: – – : – –
E X I T
“ S E T ”	: E N T R Y C U E D A T A

“ R E S E T ” : C L E A R C U E D A T A

“ C U E U P ” : E X E C U T E C U E U P

– – – M U L T I C U E U P – – – – – –

C U E I	0 0	: 0 1 : 3 5 : 1 1
C U E 2	0 3	: 4 2	: 5 9	: 2 1
C U E 3	– – : – – : – – : – –
C U E 4	1 1	: 2 1	: 4 8	: 0 7
C U E 5	– – : – – : – – : – –
E X I T
“ S E T ”	: E N T R Y C U E D A T A

“ R E S E T ” : C L E A R C U E D A T A

“ C U E U P ” : E X E C U T E C U E U P

While searching is being per- formed, the cue-up point to be searched flashes on the moni- tor.

Memo

Multi Cue-up screen During cue-up operation

zFor cue-up operation, use tapes with continuous time codes recorded.

zIf the COUNTER switch is set to CTL or UB while the Multi Cue-up screen is being displayed, the COUNTER mode does not change.

E-57