JVC BR-HD50E instruction manual Recording, Setting Menu screens

RECORDING

Settings for analog signal input

„Selecting analog input signal

Set the INPUT SELECT switch located on the front panel to LINE or Y/C.

LINE : Inputs composite video from the LINE IN terminal, and analog audio signals from the AUDIO IN terminal.

Y/C : Inputs Y/C separate signals from the Y/C IN terminal, and analog audio signals from the AUDIO IN terminal.

Setting Menu screens

„Setting VIDEO Menu screen

zSET UP [60]: DV (only for U model)

Set here according to the existence of the setup of analog video signals (composite and Y/C separate). If it exists, set here to ON. If it does not, OFF.

„Setting AUDIO Menu screen

zAUDIO MODE: DV (In DV mode only) Selects the audio sampling frequency for recording.

32k : Records in 12-bit 32 kHz mode. DV format has up to four channels of recording tracks available, but this unit only records onto two chan- nels: CH1 and CH2.

48k : Records in 16-bit 48 kHz mode. Records onto CH1 and CH2.

INPUT SELECT switch

„Setting SYSTEM Menu screen z REC LONG P. TIME

This is for setting the time for BR-HD50 to enter the tape protection mode if there is a long recording pause.

z INDEX WRITE: SYSTEM [2/2] Menu

This is for selecting whether to record index signals automatically when recording starts. (SYSTEM menu details: XPage 67 to 69)

„For settings when recording time codes, refer to pages 60 and 61.

Memo

Audio dubbing is not available on this unit.

E-41