CONNECTION
Connecting video signals
Video output, e.g., VCR/Camera
Digital input | Analog input |
|
|
HDV/DV | Y/C Composite | HDMI OUT | HD/SD Digital |
|
|
| |
|
|
| HD monitor |
IEEE1394 |
COMPONENT
OUT
Digital output | Y/C |
| Composite | ||
HDV/DV | Analog output | ||||
|
|
|
|
|
|
HD/SD Analog
Monitor
Video input, e.g., VCR
Turn off the power before making connec- tions.
Input signal
The input video signal is selected with the INPUT SELECT switch on the front panel.
zTo input analog video signals
Use the LINE IN terminal or Y/C IN terminal.
•LINE IN terminal:
Inputs composite video signals. Connect a BNC cable.
•Y/C IN terminal:
Inputs Y/C separate video signals. Connect an S video cable (4PIN).
When a wide screen ID signal is input, the ID signal is recorded.
zTo connect digital signals
Connect HDV signals or DV signals to the IEEE1394 terminal.
Connect an IEEE1394 (6PIN) cable.
HDV signals using 720p format can be input.
HDV 720p format: 720/30p, 720/24p, 480/60p 720/25p, 576/50p
•The IEEE1394 switch located on the front panel needs to be set, according to whether the video format is HDV or DV.
•Digital audio is also input from the IEEE1394 terminal.
•Power is not supplied via the IEEE1394 ter- minal.
•Attach the supplied filter to the IEEE1394 cable. (XPage 29)
•For more information on the IEEE1394 termi- nal, refer to page 18.