JVC BR-HD50E 8IEEE1394 IEEE1394 terminal switch, „ Dvcam indicator light, „ 60 indicator light

Page 17

8[IEEE1394] IEEE1394 terminal switch

Set this switch according to the video format of the IEEE1394 input signal and playback sig- nal. When the video format is HDV, a HDV indicator is lit.

HDV : Use this setting when the video format is HDV (HDV indicator is lit).

DV : Use this setting when the video format is DV (HDV indicator is off).

Note

zVideo and audio recording and playback using the IEEE1394 terminal are unavailable when the switch setting differs from the video format.

zWhen the IEEE1394 terminal is used to input/ output video or audio signals with a non-linear editing system, and the format is changed by switching this switch, either reconnect the IEEE1394 cable, or use the OPERATE button to reset the power.

„[DVCAM] indicator light

Lights when playing a tape recorded in DVCAM format.

Only tapes recorded in SP mode can be played.

„[60] indicator light

Lights when 60/50 SEL in the SYSTEM [2/2] Menu screen is set to 60.

The HD signal format on this unit is set to 60Hz.

„[50] indicator light

Lights when 60/50 SEL in the SYSTEM [2/2] Menu screen is set to 50.

The HD signal format on this unit is set to 50Hz.

Memo

The field frequency for DV signals and analog signals are fixed by region.

(U model: 60Hz, E model: 50Hz)

9Counter display

Displays the counter, menu settings, and oper- ation mode. (8 digits)

•Counter display

The displayed contents can be selected using the 7 COUNTER switch.

•For menu settings, menu code numbers are displayed.

0Audio level indicator

Displays the audio level for CH-1/3 and CH-2/ 4.

In RECORDING mode, audio recording level is displayed. In PLAY mode, audio playback level is displayed.

Only the audio recording level during analog input can be adjusted.

aIndicator lights

„[HDV] indicator light

Lights when the video format for the IEEE1394 terminal input signal or playback signal is HDV. When this indicator is lit, set the 8 IEEE1394 switch to HDV.

When this indicator is off, set the 8 IEEE1394 switch to DV.

„[REC INH] indicator light

Lights upon loading a cassette that cannot be recorded.

b[PHONES] terminal

This is the mini jack terminal for connecting to the headphone. (Stereo ø3.5)

•When playing back tapes recorded in 32 kHz mode, the audio channel output from this terminal is selected using A.OUTPUT: DV on the AUDIO Menu screen.

c[PHONES] Headphone volume

Use this switch to adjust the output level of the PHONES terminal.

Both channels are adjusted at the same time.

E-13

Page 16 Page 18
Image 17
Page 16 Page 18
Contents For Customer Use BR-HD50Important Safeguards Information for Canada Renseignement Pour Canada InformationRemarque Business users Other Countries outside the European Union Port Cable LengthEuropean Union For Your Safety Please Read the Following Text Carefully Power SystemMust be Earthed For Continental EUROPE, ETC For U.K. onlyHDV 720p format Compatible with 60Hz/50Hz HD signal for- matCompatible with DV format Compatible mechanism for standard/mini DV cassettesTable of Contents Remarks of usage Introduction„ Erasure prevention Cassette tapeStandard DV cas- z Mini DV cassettes settes LA-DV276M-DV63PRO LA-DV186M-DV63HD LA-DV124HDV and DV format „ HDV and DV signal input/output„ HD signal format „ HD video output „ HDV 720p and DV format„ Recording time „ Head cleaning Regular maintenance„ Regular maintenance Condensation Cleaning tapeOperating environ Ment1Cassette loading slot/LED Names and Functions of Parts2OPERATE button/LED 3EJECT button„ Pause button/LED „ Play button/LED„ FF button/LED „ Stop button/LED7COUNTER switch 5REMOTE/LOCAL switch 6INPUT Select switch„ Dvcam indicator light 8IEEE1394 IEEE1394 terminal switch„ 60 indicator light „ 50 indicator lightHSpecial functions/Setting buttons FRESET buttonSetting screens EMENU button„ SEARCH+/S button „ BLANK/P button„ SEARCH-/Q button „ SET buttonRear panel 2VIDEO Y/C in terminal 4-PIN3VIDEO Line OUT terminal BNC 5COMPONENT OUT Component sig- nal output terminal BNC×3 0HDMI OUT Hdmi signal output termi- nal6CH1 Audio in terminal RCA 7CH2 Audio in terminal RCACDC power cord clamp BDC power input terminalDSIGNAL GND terminal AIEEE1394 IEEE1394 terminal 6PFREMOTE RS-422A terminal D-SUB 9P ESERIAL Remote terminal mini jackGFan HSlot cover for servicingON-SCREEN Display „ HDV format „ DV formatSampling frequency/audio Output CHDate/time When the unit is in the Analog/HDV Signal RecordingIt displays the date and time Hrmmss Or Stop mode, it displays the data of the built-in clockRemaining tape VCR operation modeCounter display Display displayed during operation Description Event/Alarm displayDisplay displayed for about 3 seconds Description Display DescriptionLP Tape Invalid TapeNo HDV/DV SIG NAL Copy InhibitConnection „ Input signal„ Output signal Digital input IEEE1394 terminal 6P Connecting audio signalsAudio in terminal RCA×2 Connect an audio cable Attaching the supplied ferrite core Connecting with Serial Remote terminals „ Operate BR-HD50 with the wired remote controllerTo the DC cord. XPage Inputting analog signal RECORDING/OUTPUT Signal FormatComponent OUT ModelHD signal Input Inputting digital signalHdmi OUT terminal Line OUT terminal HDVVideo HD signal „ Output terminal video/audio signal format during playbackPlayback IEEE1394 Hdmi OUT terminalTurning off the power Turning on the powerPreparation „ Turn off BR-HD50Operation Lock mode Selecting the operating method main unit/remote controller„ Setting the REMOTE/LOCAL switch „ Turning on the Operation Lock modeEjecting the cassette tape Loading the cassette tapeSetting/Displaying date and time Setting date and timeSetting the date and time in the Clock Adjust Menu screen TC/UB/CLOCK 2/2 Menu screen„ Display Menu screen Selecting date/time displayOn-screen status display Setting the Menu screen Check settingsSelecting HD signal format Display the System 2/2 Menu screenRecording Setting Menu screens„ Selecting digital input signal Selecting input signal„ Settings for digital video format Settings for digital signal input„ Settings for recording the time code Setting related Menu screen„ Setting System Menu screen Adjusting audio recording level SettingsAdjusting audio recording level „ Increasing the recording levelAudio recording level is fixed to the initial setting value „ Adjusting the CH1 channel„ Adjusting the CH2 channel Recording index signals No backup recording „ For using GY-DV5000/DV5100 as the source unitOFF Recording begins on the source unitRemote SEL SER Recording with Serial Remote terminalsRemote 1/2 Menu screen Remote 2/2 Menu screenPlayback Video settingsSettings regarding playback function Audio settingsFast forward/rewind „ STL/F. ADV DV in the System 1/2 Menu screen Frame-advance playbackSpecial playback functions System 1/2 Menu screenSet BR-HD50 to the Playback or the Still mode Slow playback and Search mode„ DV recorded tape playback „ HDV recorded tape playbackBlank search Index search„ In the Stop mode, press the Blank button Search functionRepeat playback „ Repeat Mode in the System 1/2 Menu screenIndex repeat playback If the head is dirty, repeat play- back may not work wellRegistering cue-up points For details on time code setting and recording XPageClearing registered cue-up points Multi cue-upExiting the Multi Cue-up screen Changing cue-up pointsSearching cue-up points 2Press the R or P button again to change the time- codeDisplaying the time code Time CodeDuring DV input Checking the data of time code generatorPresetting the time code „ Set TCG Select to PresetSetting ...TC/UB/CLOCK 1/2 Menu screen Setting is preset to the time code generatorTCG Select Preset Recording from preset dataPreset time code „ Set the TC/UB/CLOCK 1/2 Menu as followsSelect the Recording mode Counter mode display shows either TCR or UBRTCG Select Regen Check the time code of the IEEE1394 terminalPress the Play button to go to the Playback mode Set the Counter switch to TC or UBCounter switch Playing back the time codeControl with the IEEE1394 ter- minal Digital signals Control with RS-422A Analog signalsEdit „ Remote 2/2 Menu screenSetting the menus „ Set BR-HD50 to the Stop or Still modeMenu Screens TOP Menu screenNo settings are selected yet Counter display shows menu code numbers when setting menusSetting Setting on the monitor display is flashingSystem 1/2 menu Structure of the Menu screens„ System 1/2 Menu screens TOP Menu screenSystem Menu screens Long Pause Repeat Mode1MIN 3MIN„ System 2/2 Menu Remote Menu screens REM FF/REW DelayREM Stop SEL PB StartAudio Menu Screen Monitor Video Menu ScreenSelect OUT FormatLetter OUT forDown Conv Test Signal Hdmi ModeUP Conv DVI Color„ TC/UB/CLOCK 1/2 Menu screen TC/UB/CLOCK Menu screens„ TC/UB/CLOCK 2/2 Menu screen AdjustClock Date MM/DD/YYDisplay Menu screen Others „ Alarm display Displayed regardless of the Display mode„ Warning display Displayed regardless of the Display mode After the REMOTE/LOCAL switch Troubleshooting Symptom Action No powerRecorded during DV signal input Unable to recordNo signal is output from No HD signal is output fromHdmi OUT or Component OUT Display on the monitorChecking the hour meter „ Set BR-HD50 to the Stop modeSystem 1/2 Menu screen is displayed Press the Menu button to return to the normal screen„ Accessories „ Connectors„ General „ Video„ External dimensions Unit mm Supplement Important Safety Instructions„ AC adapter section
Top Page Image Contents