JVC BR-HD50E 2VIDEO Y/C in terminal 4-PIN, 3VIDEO Line OUT terminal BNC, Rear panel

NAMES AND FUNCTIONS OF PARTS

Rear panel

2	1	6 7
4
	3	5 8 9	0
1[VIDEO LINE IN] terminal (BNC)		4[VIDEO Y/C OUT] terminal (4-PIN)

This is the input terminal for composite video signals.

•To input video via this terminal, set the INPUT SELECT switch located on the front panel to “LINE”.

2[VIDEO Y/C IN] terminal (4-PIN)

This is the input terminal for Y/C separate video signals.

•To input video via this terminal, set the INPUT SELECT switch located on the front panel to “Y/C”.

•When wide-screen ID signals are input, the wide-screen ID signal is recorded.

3[VIDEO LINE OUT] terminal (BNC)

This is the output terminal for composite video signals.

•It displays the Menu setting screen, Date/ Time setting screen and warning informa- tion.

•If DISPLAY in the DISPLAY Menu screen is set to “ON” or “AUTO”, information will be displayed on-screen, e.g., the operation mode, date/time and counter. (XPage 20)

•When the input signal or playback signal is in HDV format, this terminal outputs video that is converted down to 480i or 576i.

Select the style for displaying down-con- verted video on a monitor screen with a 4:3 aspect ratio, using DOWN CONV. MODE on the VIDEO Menu screen. (XPage 74)

This is the output terminal for Y/C separate video signals.

•It displays the Menu setting screen, Date/ Time setting screen and warning informa- tion.

•If DISPLAY in the DISPLAY Menu screen is set to “ON” or “AUTO”, information will be displayed on-screen, e.g., the operation mode, date/time and counter. (XPage 20)

•When the input signal or playback signal is in HDV format, this terminal outputs video that is converted down to 480i or 576i.

Select the style for displaying down-con- verted video on a monitor screen with a 4:3 aspect ratio, using DOWN CONV. MODE on the VIDEO Menu screen. (XPage 74)

•When tapes that have recorded wide- screen signals are played back, the wide- screen ID signal is output.

When playing back an HDV recorded tape, wide-screen ID signals are output according to the mode set using DOWN CONV. MODE in the VIDEO Menu screen.

Memo

Whether or not to enable SET UP for analog sig- nals (composite, Y/C separate and component signals) can be selected with SET UP [60]: DV in the VIDEO Menu screen (for U model only).

E-16