JVC BR-HD50E 5COMPONENT OUT Component sig- nal output terminal BNC×3, 6CH1 Audio in terminal RCA

Page 21

5[COMPONENT OUT] Component sig- nal output terminal (BNC×3)

Output terminal for component video signals (Y/PB/PR). Outputs analog HD/SD video. Con- nect this to an HD-compatible monitor with a COMPONENT IN terminal.

•The video format to output from this termi- nal can be selected using OUT FORMAT [60]/[50] in the VIDEO Menu screen. (XPage 73, 74)

•It displays the Menu setting screen, Date/ Time setting screen and warning informa- tion.

•If DISPLAY in the DISPLAY Menu screen is set to “ON” or “AUTO”, information will be displayed on-screen, e.g., the operation mode, date/time and counter. (XPage 20)

6[CH1 AUDIO IN] terminal (RCA)

Use this terminal to input analog audio signals. To enable audio input via this terminal, set the INPUT SELECT switch located on the front panel to “LINE” or “Y/C”.

Analog signals are recorded on CH1.

7[CH2 AUDIO IN] terminal (RCA)

Use this terminal to input analog audio signals. To enable audio input via this terminal, set the INPUT SELECT switch located on the front panel to “LINE” or “Y/C”.

Analog signals are recorded on CH2.

8[CH1/3 AUDIO OUT] terminal (RCA)

Use this terminal to output analog audio sig- nals.

•In the 48 kHz audio mode, it outputs the sound of CH1.

•The output audio channel during playback of tapes recorded in 32 kHz audio mode, or the EE audio channel during DV signal input in 32 kHz audio mode, can be selected using A.OUTPUT: DV in the AUDIO Menu screen. (XPage 72)

9[CH2/4 AUDIO OUT] terminal (RCA)

Use this terminal to output analog audio sig- nals.

•In the 48 kHz audio mode, it outputs the sound of CH2.

•The output audio channel during playback of tapes recorded in 32 kHz audio mode, or the EE audio channel during DV signal input in 32 kHz audio mode, can be selected using A.OUTPUT: DV in the AUDIO Menu screen. (XPage 72)

0[HDMI OUT] HDMI signal output termi- nal

Outputs HDMI signals. (HDMI : High Definition Multimedia Interface)

Outputs digital HD/SD video and digital audio. This is connected to a monitor with an HDMI terminal.

•The video format to output from this termi- nal can be selected using OUT FORMAT [60]/[50] and MONITOR SELECT in the VIDEO Menu screen. (XPage 73, 74)

•It displays the Menu setting screen, Date/ Time setting screen and warning informa- tion.

•If DISPLAY in the DISPLAY Menu screen is set to “ON” or “AUTO”, information will be displayed on-screen, e.g., the operation mode, date/time and counter. (XPage 20)

Memo

zVideo is not displayed when the connected monitor does not support the video format selected using OUT FORMAT [60]/[50] in the VIDEO Menu screen.

If this occurs, set MONITOR SELECT to HDMI[A].

zIf the monitor has a DVI-D terminal that sup- ports HDCP, you can watch digital video by connecting an HDMI↔DVI-D cable.

zWhen the video format of the IEEE1394 input signal differs from the IEEE1394 switch, or INPUT SELECT switch is set to HDV/DV and a signal is not input into the IEEE1394 terminal, no signal is output from the HDMI OUT termi- nal. ("no 1394" is displayed on the counter dis- play.) Similarly, no signal is output from the HDMI OUT terminal when a blank cassette tape is played. ("-------" is displayed on the counter display.)

E-17

Page 20 Page 22
Image 21
Page 20 Page 22
Contents For Customer Use BR-HD50Important Safeguards Information RemarqueInformation for Canada Renseignement Pour Canada Port Cable Length European UnionBusiness users Other Countries outside the European Union For Your Safety Please Read the Following Text Carefully Power SystemMust be Earthed For Continental EUROPE, ETC For U.K. onlyHDV 720p format Compatible with 60Hz/50Hz HD signal for- matCompatible with DV format Compatible mechanism for standard/mini DV cassettesTable of Contents Remarks of usage Introduction„ Erasure prevention Cassette tapeStandard DV cas- z Mini DV cassettes settes LA-DV276M-DV63PRO LA-DV186M-DV63HD LA-DV124„ HDV and DV signal input/output „ HD signal formatHDV and DV format „ HDV 720p and DV format „ Recording time„ HD video output Regular maintenance „ Regular maintenance„ Head cleaning Condensation Cleaning tapeOperating environ Ment1Cassette loading slot/LED Names and Functions of Parts2OPERATE button/LED 3EJECT button„ Pause button/LED „ Play button/LED„ FF button/LED „ Stop button/LED7COUNTER switch 5REMOTE/LOCAL switch 6INPUT Select switch„ Dvcam indicator light 8IEEE1394 IEEE1394 terminal switch„ 60 indicator light „ 50 indicator lightHSpecial functions/Setting buttons FRESET buttonSetting screens EMENU button„ SEARCH+/S button „ BLANK/P button„ SEARCH-/Q button „ SET button2VIDEO Y/C in terminal 4-PIN 3VIDEO Line OUT terminal BNCRear panel 5COMPONENT OUT Component sig- nal output terminal BNC×3 0HDMI OUT Hdmi signal output termi- nal6CH1 Audio in terminal RCA 7CH2 Audio in terminal RCACDC power cord clamp BDC power input terminalDSIGNAL GND terminal AIEEE1394 IEEE1394 terminal 6PFREMOTE RS-422A terminal D-SUB 9P ESERIAL Remote terminal mini jackGFan HSlot cover for servicingON-SCREEN Display „ HDV format „ DV formatSampling frequency/audio Output CHDate/time When the unit is in the Analog/HDV Signal RecordingIt displays the date and time Hrmmss Or Stop mode, it displays the data of the built-in clockVCR operation mode Counter displayRemaining tape Display displayed during operation Description Event/Alarm displayDisplay displayed for about 3 seconds Description Display DescriptionLP Tape Invalid TapeNo HDV/DV SIG NAL Copy InhibitConnection „ Input signal„ Output signal Connecting audio signals Audio in terminal RCA×2 Connect an audio cableDigital input IEEE1394 terminal 6P Attaching the supplied ferrite core Connecting with Serial Remote terminals „ Operate BR-HD50 with the wired remote controllerTo the DC cord. XPage Inputting analog signal RECORDING/OUTPUT Signal FormatComponent OUT ModelHD signal Input Inputting digital signalHdmi OUT terminal Line OUT terminal HDVVideo HD signal „ Output terminal video/audio signal format during playbackPlayback IEEE1394 Hdmi OUT terminalTurning off the power Turning on the powerPreparation „ Turn off BR-HD50Operation Lock mode Selecting the operating method main unit/remote controller„ Setting the REMOTE/LOCAL switch „ Turning on the Operation Lock modeEjecting the cassette tape Loading the cassette tapeSetting/Displaying date and time Setting date and timeSetting the date and time in the Clock Adjust Menu screen TC/UB/CLOCK 2/2 Menu screenSelecting date/time display On-screen status display„ Display Menu screen Setting the Menu screen Check settingsSelecting HD signal format Display the System 2/2 Menu screenRecording Setting Menu screens„ Selecting digital input signal Selecting input signal„ Settings for digital video format Settings for digital signal inputSetting related Menu screen „ Setting System Menu screen„ Settings for recording the time code Adjusting audio recording level SettingsAdjusting audio recording level „ Increasing the recording level„ Adjusting the CH1 channel „ Adjusting the CH2 channelAudio recording level is fixed to the initial setting value Recording index signals No backup recording „ For using GY-DV5000/DV5100 as the source unitOFF Recording begins on the source unitRemote SEL SER Recording with Serial Remote terminalsRemote 1/2 Menu screen Remote 2/2 Menu screenPlayback Video settingsSettings regarding playback function Audio settingsFast forward/rewind „ STL/F. ADV DV in the System 1/2 Menu screen Frame-advance playbackSpecial playback functions System 1/2 Menu screenSet BR-HD50 to the Playback or the Still mode Slow playback and Search mode„ DV recorded tape playback „ HDV recorded tape playbackBlank search Index search„ In the Stop mode, press the Blank button Search functionRepeat playback „ Repeat Mode in the System 1/2 Menu screenIndex repeat playback If the head is dirty, repeat play- back may not work wellRegistering cue-up points For details on time code setting and recording XPageClearing registered cue-up points Multi cue-upExiting the Multi Cue-up screen Changing cue-up pointsSearching cue-up points 2Press the R or P button again to change the time- codeDisplaying the time code Time CodeDuring DV input Checking the data of time code generatorPresetting the time code „ Set TCG Select to PresetSetting ...TC/UB/CLOCK 1/2 Menu screen Setting is preset to the time code generatorTCG Select Preset Recording from preset dataPreset time code „ Set the TC/UB/CLOCK 1/2 Menu as followsSelect the Recording mode Counter mode display shows either TCR or UBRTCG Select Regen Check the time code of the IEEE1394 terminalPress the Play button to go to the Playback mode Set the Counter switch to TC or UBCounter switch Playing back the time codeControl with the IEEE1394 ter- minal Digital signals Control with RS-422A Analog signalsEdit „ Remote 2/2 Menu screenSetting the menus „ Set BR-HD50 to the Stop or Still modeMenu Screens TOP Menu screenNo settings are selected yet Counter display shows menu code numbers when setting menusSetting Setting on the monitor display is flashingSystem 1/2 menu Structure of the Menu screensTOP Menu screen System Menu screens„ System 1/2 Menu screens Long Pause Repeat Mode1MIN 3MIN„ System 2/2 Menu Remote Menu screens REM FF/REW DelayREM Stop SEL PB StartAudio Menu Screen Monitor Video Menu ScreenSelect OUT FormatOUT for Down ConvLetter Test Signal Hdmi ModeUP Conv DVI Color„ TC/UB/CLOCK 1/2 Menu screen TC/UB/CLOCK Menu screens„ TC/UB/CLOCK 2/2 Menu screen AdjustClock Date MM/DD/YYDisplay Menu screen Others „ Alarm display Displayed regardless of the Display mode„ Warning display Displayed regardless of the Display mode After the REMOTE/LOCAL switch Troubleshooting Symptom Action No powerRecorded during DV signal input Unable to recordNo signal is output from No HD signal is output fromHdmi OUT or Component OUT Display on the monitorChecking the hour meter „ Set BR-HD50 to the Stop modeSystem 1/2 Menu screen is displayed Press the Menu button to return to the normal screen„ Accessories „ Connectors„ General „ Video„ External dimensions Unit mm Important Safety Instructions „ AC adapter sectionSupplement
Top Page Image Contents