JVC BR-HD50E Registering cue-up points, Clearing registered cue-up points, Multi cue-up

PLAYBACK

Multi cue-up

Using the time codes recorded on the tape, up to 5 points on the tape can be registered as cue-up points at the Multi Cue-up screen. The registered tape positions (cue-up points) can be searched.

R button	RESET button
SET button
P button	CUE UP button	COUNTER swicth

Registering cue-up points

1.Set the COUNTER switch to TC.

2.Load a tape with time codes recorded.

3.Press the CUE UP button.

The MULTI CUE UP screen appears on the monitor.

4.Perform playback or search. At the position to be regis- tered, set it to the STILL or STOP mode.

5.Press the R or P button to bring the cursor to the cue- up point. Press the SET button.

Register the time code data of the current position as a cue- up point.

•If no tape is loaded, “00” is registered.

•Cue-up points can be registered while the tape is being played back.

6.To register more cue-up points, repeat steps 4 and 5. Up to 5 cue-up points can be registered.

Clearing registered cue-up points

Press the R or P button to bring the cursor to the cue-up point to be cleared. Press the RESET button.

After a cue-up point is cleared, “– –” is displayed.

Memo

For details on time code setting and recording:

(XPage 58)

Cursor

Cue-up point

– – – M U L T I C U E U P – – – – – –

C U E I	0 0	: 0 1 : 3 5 : 1 1
C U E 2	0 3	: 4 2	: 5 9	: 2 1
C U E 3	– – : – – : – – : – –
C U E 4	1 1	: 2 1	: 4 8	: 0 7
C U E 5	– – : – – : – – : – –
E X I T
“ S E T ”	: E N T R Y C U E D A T A

“ R E S E T ” : C L E A R C U E D A T A

“ C U E U P ” : E X E C U T E C U E U P

MULTI CUE UP screen

E-56