JVC BR-HD50E Rem Ff/Rew, REM Stop SEL, PB Start, Delay, Synchroni, Zation, Controller, Sel

Page 75

„REMOTE [2/2] Menu screen

Item

Setting

 

Description

 

 

 

 

REM FF/REW

EFF/REW (00)

For setting the action to be performed when the REMOTE termi-

MODE

SEARCH (01)

nal or IEEE1394 terminal received an FF/REW command:

 

(0205)

 

FF/REW : Sets BR-HD50 to perform FF/REW when an FF/REW

 

 

 

command is received. Normal setting.

 

 

 

SEARCH : Sets BR-HD50 to perform searching when an FF/

 

 

 

REW command is received. Use this setting if the

 

 

 

search (cue up) function does not work properly.

 

 

 

REM STOP SEL

EEE (00)

For setting the action to be performed when the REMOTE termi-

(0206)

PB (01)

nal received a STANDBY-ON command:

 

 

 

EE: Sets BR-HD50 to the EE mode. (It goes into the STOP mode.)

 

 

PB : Sets BR-HD50 to the PLAY mode. (It goes into the STILL mode.)

PB START

E0F (00)

For adjusting the edit timing. With the remote controller in use, if

DELAY

the start points of edit are not concurrent, adjust the playback

(0207)

9F (09)

startup timing:

 

 

10F (0A)

0F

: No correction.

 

 

1F to 15F : Delays the timing by the number of frames set by the

 

15F (0F)

 

user. When BR-HD50 is connected to an editing

 

 

 

remote controller with no bump function, use this set-

 

 

 

ting to adjust the editing precision.

 

 

 

 

SYNCHRONI-

OFF (00)

For enabling/disabling the bump function when BR-HD50 is con-

ZATION

EON (01)

nected to an editing remote controller:

 

(0208)

 

OFF: No synchronization.

 

 

 

ON : Performs synchronization. The editing precision is

 

 

 

enhanced. Please set the pre-roll time to at least 7 seconds.

 

 

 

CONTROLLER

ETYPE1 (00)

For setting the type of controller to be connected when remote

SEL

TYPE2 (01)

control is enabled with the RS-422A interface:

 

(0209)

TYPE3 (02)

TYPE1 : RM-G820

 

 

TYPE4 (03)

TYPE2 : RM-G860 (set the preroll time to at least 10 seconds)

 

TYPE5 (04)

TYPE3 : AG-A850

 

 

TYPE6 (05)

TYPE4 : RM-450, PVE-500

 

 

TYPE7 (06)

TYPE5 : FXE-100, FXE-120

 

 

 

TYPE6 : (Not in use)

 

 

 

TYPE7 : Avid Xpress DV, Canopus

 

 

 

 

DV Rex-RT Professional

 

 

 

 

FOOT SW

EOFF (00)

For setting when an external switch (e.g., a footswitch) is con-

(020A)

L EDGE (01)

nected to the SERIAL REMOTE terminal. Before operating an

 

H EDGE (02)

external switch (footswitch) with L EDGE or H EDGE, turn BR-

 

L LEVEL (03)

HD50 to the RECORDING PAUSE or RECORDING mode:

 

 

 

OFF

: For when the external switch is not used.

 

 

 

L EDGE : Recording and recording pause is switched

at the

 

 

 

LOW edge of the external switch signal.

 

 

 

H EDGE : Recording and recording pause is switched

at the

 

 

 

HIGH edge of the external switch signal.

 

 

 

L LEVEL : Record at the LOW edge and pause recording at the

 

 

 

HIGH edge of the external switch signal.

 

 

 

 

 

PAGE BACK

 

Return to the REMOTE [1/2] Menu screen.

 

 

 

 

 

 

E-71

Page 74 Page 76
Image 75
Page 74 Page 76
Contents For Customer Use BR-HD50Important Safeguards Information RemarqueInformation for Canada Renseignement Pour Canada Port Cable Length European UnionBusiness users Other Countries outside the European Union For Continental EUROPE, ETC For U.K. only Power SystemFor Your Safety Please Read the Following Text Carefully Must be EarthedCompatible mechanism for standard/mini DV cassettes Compatible with 60Hz/50Hz HD signal for- matHDV 720p format Compatible with DV formatTable of Contents Remarks of usage IntroductionLA-DV276M-DV63PRO LA-DV186M-DV63HD LA-DV124 Cassette tape„ Erasure prevention Standard DV cas- z Mini DV cassettes settes„ HDV and DV signal input/output „ HD signal formatHDV and DV format „ HDV 720p and DV format „ Recording time„ HD video output Regular maintenance „ Regular maintenance„ Head cleaning Ment Cleaning tapeCondensation Operating environ3EJECT button Names and Functions of Parts1Cassette loading slot/LED 2OPERATE button/LED„ Stop button/LED „ Play button/LED„ Pause button/LED „ FF button/LED7COUNTER switch 5REMOTE/LOCAL switch 6INPUT Select switch„ 50 indicator light 8IEEE1394 IEEE1394 terminal switch„ Dvcam indicator light „ 60 indicator lightEMENU button FRESET buttonHSpecial functions/Setting buttons Setting screens„ SET button „ BLANK/P button„ SEARCH+/S button „ SEARCH-/Q button2VIDEO Y/C in terminal 4-PIN 3VIDEO Line OUT terminal BNCRear panel 7CH2 Audio in terminal RCA 0HDMI OUT Hdmi signal output termi- nal5COMPONENT OUT Component sig- nal output terminal BNC×3 6CH1 Audio in terminal RCAAIEEE1394 IEEE1394 terminal 6P BDC power input terminalCDC power cord clamp DSIGNAL GND terminalHSlot cover for servicing ESERIAL Remote terminal mini jackFREMOTE RS-422A terminal D-SUB 9P GFanON-SCREEN Display Output CH „ DV format„ HDV format Sampling frequency/audioOr Stop mode, it displays the data of the built-in clock When the unit is in the Analog/HDV Signal RecordingDate/time It displays the date and time HrmmssVCR operation mode Counter displayRemaining tape Display Description Event/Alarm displayDisplay displayed during operation Description Display displayed for about 3 seconds DescriptionNAL Copy Inhibit Invalid TapeLP Tape No HDV/DV SIGConnection „ Input signal„ Output signal Connecting audio signals Audio in terminal RCA×2 Connect an audio cableDigital input IEEE1394 terminal 6P Attaching the supplied ferrite core Connecting with Serial Remote terminals „ Operate BR-HD50 with the wired remote controllerTo the DC cord. XPage Model RECORDING/OUTPUT Signal FormatInputting analog signal Component OUTHDV Inputting digital signalHD signal Input Hdmi OUT terminal Line OUT terminalIEEE1394 Hdmi OUT terminal „ Output terminal video/audio signal format during playbackVideo HD signal Playback„ Turn off BR-HD50 Turning on the powerTurning off the power Preparation„ Turning on the Operation Lock mode Selecting the operating method main unit/remote controllerOperation Lock mode „ Setting the REMOTE/LOCAL switchEjecting the cassette tape Loading the cassette tapeTC/UB/CLOCK 2/2 Menu screen Setting date and timeSetting/Displaying date and time Setting the date and time in the Clock Adjust Menu screenSelecting date/time display On-screen status display„ Display Menu screen Display the System 2/2 Menu screen Check settingsSetting the Menu screen Selecting HD signal formatRecording Setting Menu screensSettings for digital signal input Selecting input signal„ Selecting digital input signal „ Settings for digital video formatSetting related Menu screen „ Setting System Menu screen„ Settings for recording the time code „ Increasing the recording level SettingsAdjusting audio recording level Adjusting audio recording level„ Adjusting the CH1 channel „ Adjusting the CH2 channelAudio recording level is fixed to the initial setting value Recording index signals Recording begins on the source unit „ For using GY-DV5000/DV5100 as the source unitNo backup recording OFFRemote 2/2 Menu screen Recording with Serial Remote terminalsRemote SEL SER Remote 1/2 Menu screenPlayback Video settingsSettings regarding playback function Audio settingsFast forward/rewind System 1/2 Menu screen Frame-advance playback„ STL/F. ADV DV in the System 1/2 Menu screen Special playback functions„ HDV recorded tape playback Slow playback and Search modeSet BR-HD50 to the Playback or the Still mode „ DV recorded tape playbackSearch function Index searchBlank search „ In the Stop mode, press the Blank buttonIf the head is dirty, repeat play- back may not work well „ Repeat Mode in the System 1/2 Menu screenRepeat playback Index repeat playbackMulti cue-up For details on time code setting and recording XPageRegistering cue-up points Clearing registered cue-up points2Press the R or P button again to change the time- code Changing cue-up pointsExiting the Multi Cue-up screen Searching cue-up pointsChecking the data of time code generator Time CodeDisplaying the time code During DV inputSetting is preset to the time code generator „ Set TCG Select to PresetPresetting the time code Setting ...TC/UB/CLOCK 1/2 Menu screen„ Set the TC/UB/CLOCK 1/2 Menu as follows Recording from preset dataTCG Select Preset Preset time codeCheck the time code of the IEEE1394 terminal Counter mode display shows either TCR or UBRSelect the Recording mode TCG Select RegenPlaying back the time code Set the Counter switch to TC or UBPress the Play button to go to the Playback mode Counter switch„ Remote 2/2 Menu screen Control with RS-422A Analog signalsControl with the IEEE1394 ter- minal Digital signals EditTOP Menu screen „ Set BR-HD50 to the Stop or Still modeSetting the menus Menu ScreensSetting on the monitor display is flashing Counter display shows menu code numbers when setting menusNo settings are selected yet SettingSystem 1/2 menu Structure of the Menu screensTOP Menu screen System Menu screens„ System 1/2 Menu screens 3MIN Repeat ModeLong Pause 1MIN„ System 2/2 Menu Remote Menu screens PB Start DelayREM FF/REW REM Stop SELAudio Menu Screen OUT Format Video Menu ScreenMonitor SelectOUT for Down ConvLetter DVI Color Hdmi ModeTest Signal UP Conv„ TC/UB/CLOCK 1/2 Menu screen TC/UB/CLOCK Menu screensDate MM/DD/YY Adjust„ TC/UB/CLOCK 2/2 Menu screen ClockDisplay Menu screen Others „ Alarm display Displayed regardless of the Display mode„ Warning display Displayed regardless of the Display mode Unable to record Troubleshooting Symptom Action No powerAfter the REMOTE/LOCAL switch Recorded during DV signal inputDisplay on the monitor No HD signal is output fromNo signal is output from Hdmi OUT or Component OUTPress the Menu button to return to the normal screen „ Set BR-HD50 to the Stop modeChecking the hour meter System 1/2 Menu screen is displayed„ Video „ Connectors„ Accessories „ General„ External dimensions Unit mm Important Safety Instructions „ AC adapter sectionSupplement
Top Page Image Contents