JVC BR-HD50E Selecting the operating method main unit/remote controller, Operation Lock mode

PREPARATION

Operation method (main unit/remote controller) and OPERATION LOCK mode

Selecting the operating method (main unit/remote controller)

Whether to operate BR-HD50 with its buttons or the remote con- troller can be selected with the REMOTE/LOCAL switch.

„Setting the REMOTE/LOCAL switch

•To operate with the buttons of BR-HD50, set it to “LOCAL”.

•To operate BR-HD50 with RS-422A editing remote controller that is connected to the REMOTE terminal, set it to “REMOTE”.

Memo

With the REMOTE/LOCAL switch set to REMOTE, RS-422A can be enabled using REMOTE SEL 9P in the REMOTE [1/2] Menu screen.

•The setting position of the REMOTE switch for operating BR- HD50 with the SERIAL REMOTE terminal can be selected using REMOTE SEL SER in the REMOTE [1/2] Menu screen.

•The setting position of the REMOTE switch for operating BR- HD50 with the IEEE1394 terminal can be selected at REM SEL HDV/DV in the REMOTE [1/2] Menu screen.

[XPage 70 “REMOTE [1/2] Menu screen”]

REMOTE/LOCAL switch

REMOTE [1/2] Menu screen

	– – – R E MO T E [ 1 / 2 ] – – –
R E MO T E S E L 9 P		O N
R E MO T E S E L S E R		O N
R E M S E L H D V / D V		O N
L O C A L F U N C T I O N		S T P + E J T
P R E R O L L		7 S E C
N E X T	P A G E
P A G E	B A C K

Memo

If the REMOTE/LOCAL switch is set to REMOTE, the buttons that can be operated by the main unit can be selected with

LOCAL FUNCTION.

OPERATION LOCK mode

BR-HD50 comes with an operation lock function to prevent unauthorized or incorrect operation.

In the OPERATION LOCK mode, the operation buttons and slide switches of BR-HD50 are disabled. However, the OPERATE ON and MENU operations are effective.

The PHONES volume is always effective.

„Turning on the OPERATION LOCK mode

Set OPERATION LOCK in the SYSTEM [2/2] Menu screen to ON.

•If the operation button of BR-HD50 is pressed while BR- HD50 is in the OPERATION LOCK mode, “OPERATION LOCK” is displayed on the monitor for about 3 seconds.

„Turning off the OPERATION LOCK mode

Set OPERATION LOCK in the SYSTEM [2/2] Menu screen to OFF.

SYSTEM [2/2] Menu screen

– – – S Y S T E M [ 2 / 2 ] – – – – – –

D C I N M O D E		O P E O F F
I N D E X W R I T E		I N D E X
O P E R A T I O N L O C K		O N
6 0 / 5 0	S E L	6 0
F A C T O R Y S E T T I N G		C A N C E L
D R U M H O U R M E T E R		0 0 0 0 0 0
P A G E	B A C K

E-36