Aiwa HV-FX8100U operating instructions Specifications, Vhf Uhf

Specifications

Video recording system
	Rotary 2 head helical scanning system
Video head	Double azimuth 4 head
Tuner system	Frequency synthesized tuner
TV system	M
Video signal system
	NTSC color system, 525 lines,
	60 fields
Usable cassettes	VHS video cassette
Recording/Playback time
	SP: 3.5 hours with T-210 tape
	LP: 7 hours with T-210 tape
	SLP:10.5 hours with T-210 tape
Tape speed	SP: 33.35 mm/sec
	LP: 16.67 mm/sec
	SLP:11.12 mm/sec
Fast-forward/	Approx. 110 seconds
Rewind time	with T-120 tape
Channel coverage	VHF:	2 to 13
	UHF:	14 to 69
	CATV: 5A, A-5 to A-1, A to W,
		W+1 to W+84
RF output	VHF channel 3 or 4 (switchable), 66 dBµ
Video input	1.0Vp-p, 75 ohm, unbalanced
Video output	1.0Vp-p, 75 ohm, unbalanced
Horizontal resolution
	230 lines (at SP)
Video S/N	50dB (nominal)
Audio track	3 tracks (Hi-Fi sound 2 tracks,
	Normal sound 1 track)
Audio input	–8dBs, 50K ohm
Audio output	–8dBs, less than 1K ohm
Audio frequency response
	normal: 100Hz-10kHz (at SP)
	Hi-Fi: 20Hz-20kHz (at SP)
Audio S/N	normal: more than 42 dB (at SP)
Hi-Fi dynamic range
	more than 90 dB (at SP)

Operating temperature

5°C to 40°C

Power requirements

	120V AC, 60Hz
Power consumption
	12 W
	TYP 2.5W (standby mode)
Dimensions	360(W) ⋅ 232.5(D) ⋅ 94(H) mm
	(141/4 ⋅ 131/8 ⋅ 33/4 in.)
Weight	3.2 kg (7.1 lbs.)
Supplied accessories
	Batteries (R03, size AAA) (2)
	Remote control (1)
	Antenna cable (1)
	Audio/video cable (1)

Design and specifications are subject to change without notice for the purpose of performance improvement.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technical for help.

Caution

Modifications or adjustment to this product, which are not expressly approved by the manufacturer, may void the user's right authority to operate this product.

ENGLISH 30