Heath Zenith 598-1135-08 Troubleshooting Guide, Technical Service, Regulatory Information

Page 12

Troubleshooting Guide

SYMPTOM

POSSIBLE CAUSE

SOLUTION

 

 

 

 

 

Device does not come on.

1.

Circuit breaker or fuse is turned off.

1.

Verify circuit breaker or fuse is turned

 

 

 

 

on.

 

2.

Switch on device is turned off.

2.

Verify switched device is turned on.

 

3.

Interrupted by another device.

3.

Change codes on transmitter and

 

 

 

 

receiver units.

 

4.

Does not respond immediately after

4.

Wait for 90 second initialization period

 

 

installation.

 

(remote motion sensor).

 

5.

Signals from transmitter are being

5.

Check for metal objects that could

 

 

blocked, or transmitter is out of

 

block the signal, or reposition the

 

 

range.

 

transmitter.

 

6.

Weak battery in the transmitter.

6.

Check battery charge and replace if

 

 

 

 

necessary.

 

7.

Dip switches on transmitter and receiver

7.

Verify code settings on transmitter

 

 

units do not match.

 

and receiver units are set the same.

 

8.

Device is defective.

8.

Test using different device.

 

 

 

 

 

Device does not turn off.

1.

Same as 5, 6, and 7 above.

1.

Same as 5, 6, and 7 above.

 

 

 

 

 

Device comes on randomly.

1.

Short term power line failure.

1.

Next transmission from transmitter

 

 

 

 

will reset receiver to correct state.

 

2.

Another transmitter on the same

2.

Change codes on transmitter and

 

 

frequency.

 

receiver units.

 

 

 

 

 

Technical Service

Please call 1-800-858-8501 (English speaking only) for assistance before returning product to store.

If you experience a problem, follow this guide.You may also want to visit our Web site at: www.hzsupport.com. If the problem persists, call* for assistance at 1-800-858-8501(English speaking only), 7:30 AM to 4:30 PM CST (M-F). You may also write* to:

HeathCo LLC

P.O. Box 90004, Bowling Green, KY 42102-9004 ATTN: Technical Service

*If contacting Technical Service, please have the following information available: Model Number, Date of Purchase, and Place of Purchase.

No Service Parts Available for this Product

Regulatory Information

This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The user is cautioned that changes or modifications not expressly approved by the party responsible for regulatory compliance could void the user’s authority to operate the equipment.

12

598-1135-08

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Features Code SettingsExample 2 Code Settings, System Example 1 Code Settings, SystemCode Switch Locations Remote Control Indoor Wireless Motion SensorAdd-A-Switch Kid’s Remote Control Wall Switch Receiver Receptacle ReceiverRemote Control Rear View of Remote ControlOptional Car Visor Clip Included Function ControlsIndoor and outdoor Wireless Motion Sensor Select Night or 24 Hour ModeInstalling Batteries Battery CompartmentInstalling Indoor Motion Sensor Directly To Wall Installing Outdoor Motion SensorCheck Operation and Adjustment Adjusting Outdoor Motion Sensor Coverage Outdoor Motion Sensor Coverage AreaIndoor and Outdoor Motion Sensor Sensitivity Motion Sensor ControlsAdd-A-Switch Kid’s Remote ControlInstallation Battery ReplacementWAY Wall Switch Transmitter Removing Tab In Battery ChamberInside of Remote Control Bulb Replacement Wall Switch Receiver ImportantInformationRegarding3-WaySwitchInstallationsInstalling Wall Switch Receiver Receiver InformationTesting and Operation Receptacle Screw Wall Plate Ground Wire Bare or GreenInstalling Receptacle Receiver Receptacle ReceiverTroubleshooting Guide Technical ServiceNo Service Parts Available for this Product Regulatory InformationTWO Year Limited Warranty Caracteristicas Calibraciones DEL CódigoEjemplo 1 Calibraciones del código, sistema Ejemplo 2 Calibraciones del código, sistemaUbicaciones DE LOS Interruptores DE Circuito Impreso Tapa de AccesoInterruptores de circuito impreso De circuito On impreso Receptor de pared con interruptorControl remoto Presilla opcional del visor del carro incluidaRetiro de la presilla del visor Vista posterior Seleccione modo nocturno o modo de 24 horas Instalación de las bateríasControl Características No se requiere cableadoZócalo de la consola Tuerca MovimientoFijación del detector de movimiento directamente a la pared Instalación del detector de movimiento para uso Exterior Revisión de la operación y de la regulaciónDetector de movimiento para uso exterior Los controles Instalación del detector de movimientoControles del detector de movimiento Interruptor a añadible InstalaciónOperación Reemplazo de la bateríaControl Remoto Para Niños Transmisor de pared con conmutador tridireccionalInterior del control remoto Retiro de la puerta de accesoConductores retorno TransmisorTierra del conmutador De paredInformación DEL Receptor Receptor DE Pared CON InterruptorInstalación Reemplazo de la bombillaReceptor CON Tomacorriente Instalación del receptor de pared con interruptorInstalación del receptor con tomacorriente Guía de Análisis de Averías Servicio TécnicoPrueba y operación No hay piezas de servicio disponibles para este productoInformación Regulatoria Garantía Limitada a 2 AñosCaractéristiques Réglage DES CodesExemple 1 Réglage des codes, System Exemple 2 Réglage des codes, systèmeEmplacement DES MICRO-INTERRUPTEURS Télécommande Détecteur de mouvements sans fil IntérieurDétecteur de mouvements sans fil Extérieur MicroTélécommande Commandes des fonctionsVue arrière de la télécommande Pince de pare-soleil dautomobile facultative CompriseSélection du mode de nuit ou du mode 24 heures Installation des pilesDétecteurs DE Mouvement Sans FIL Intérieurs ET Extérieurs Compartiment des pilesRetirez les piles Important Serrer à la main seulement, ne pas trop serrerInstallation du détecteur de mouvements extérieur Installation du détecteur de mouvementDétecteur de mouvements extérieur Les commandes « Commandes du détecteur de mouvementZone de couverture du détecteur de mouvements intérieur Zone de couverture du détecteur de mouvements extérieurMouvementMouvement Remplacement de la pile Interrupteur d’appointFonctionnement Télécommande Pour Enfant Intérieur de la télécommandeÉmetteur Dinterrupteur Mural À Trois Voies Retrait de la porte d’accèsFils de connexion Remplacement de l’ampoule Informations SUR LE RécepteurInterrupteur Récepteur Mural Puissance nominaleInstallation de l’interrupteur transmetteur mural Installation de la prise réceptricePrise réceptrice Guide DE Dépannage Essai et fonctionnementService Technique Renseignements de règlementsGarantie Limitée DE 2 ANS Aucune pièce de rechange n’est disponible pour ce produit598-1135-08 Is nçaa fr 598-1135-08

598-1135-08 specifications

The Heath Zenith 598-1135-08 is a state-of-the-art motion-activated floodlight designed to enhance security and visibility around your home or property. With its durable construction and advanced technological features, this floodlight offers an efficient solution for outdoor lighting needs.

One of the key aspects of the Heath Zenith 598-1135-08 is its reliable motion detection technology. Featuring a high-performance sensor, this floodlight can detect movement within a wide range, typically up to 240 degrees. This expansive field of view ensures that any activity within its range is promptly detected, providing an added layer of security for your belongings and family.

The floodlight also boasts an impressive illumination capacity. Equipped with powerful LED bulbs, it delivers bright, energy-efficient lighting that can easily illuminate large outdoor areas. The LED technology not only ensures a longer lifespan for the bulbs but also significantly reduces energy consumption, making it an environmentally friendly choice.

Another notable characteristic is the adjustable settings available with the Heath Zenith 598-1135-08. Users can easily customize the sensitivity of the motion sensor, allowing it to adapt to specific needs such as varying outdoor conditions or traffic levels. Additionally, the floodlight offers a time delay feature, permitting the light to stay on for a designated period after motion is detected, providing extra convenience.

The design of the Heath Zenith 598-1135-08 combines functionality with aesthetic appeal. The sleek, modern look of the floodlight makes it suitable for various types of homes and outdoor settings. Moreover, its weather-resistant construction ensures that it can withstand harsh weather conditions, maintaining its performance throughout the seasons.

Installation of the Heath Zenith 598-1135-08 is straightforward, making it accessible for homeowners looking to enhance their outdoor lighting without professional assistance. The adjustable head allows for directional lighting, ensuring that specific areas can be spotlighted as needed.

Overall, the Heath Zenith 598-1135-08 is an exemplary choice for homeowners seeking robust, energy-efficient outdoor lighting solutions. Its combination of advanced motion detection technology, customizable settings, and durable design makes it a valuable addition for increased security and visibility around any property.
Top Page Image Contents