CyberHome Entertainment 1600 user manual Operation of rear panel

OPERATION

Operation of rear panel

1 1 2 3 4 5 6

7 8 9 10

1	AC IN 100-230V:	Mains socket for connecting to the mains supply (100-230V) with the
		power cord. Plug the matching end of the power cord into the unit before
		connecting the other end to the wall socket.
2	ANTENNA IN:	Aerial input for connecting to the aerial.
3	COAXIAL OUTPUT:	Digital coaxial audio output for connection to a digital audio device (ampli-
		fier/receiver). Please note that the amplifier/receiver has to be compatible
		to Dolby Digital, MPEG and/or PCM (for more information please refer to
		the manual of your amplifier/receiver).
4	AUDIO R/L OUTPUT:	Analogue 2-channel audio outputs (white/red socket) for connection to a
		television, AV receiver, beamer or stereo system.
5	VIDEO OUTPUT:	Composite video output (yellow socket) for connecting to a TV with a video
		input (CVBS, composite video) by an audio/video cable.
6	REGION CODE:	Indicates that the device is set to DVD region code “2”.
7	ANTENNA OUT:	Aerial output for connecting to the TV.
8	EXT2 AUX:	SCART socket 2 for connecting additional devices, e.g. DVD player, video
		recorder, camcorder, satellite receiver, set-top box. To select, use the
		“SOURCE” button and select “Video 1” or “S-Video”.
9	S-VIDEO OUTPUT:	S-Video output for connection to a TV with S-Video input by an S-Video
		cable. The S-Video output can be used instead of the video output, result-
		ing in a higher video quality than standard composite video.
a EXT1 TO TV:		SCART socket 1 for connecting to the TV.

12