CyberHome Entertainment 1600 Connecting the DVD Recorder, Connecting the DVD recorder to the TV

CONNECTING THE DVD RECORDER

1 2

ANTENNA IN

Connecting the DVD recorder to the TV

For that your DVD recorder can record and play back a TV broadcast, the necessary cable connections have to be made first. Connect the DVD recorder directly to the TV. If you connect the DVD recorder through the video recorder to the TV, there will be the Macrovision copyright protection.

When installing your DVD recorder for the first time, please choose from the following possibilities:

Connection with SCART cable - Audio and video connection which enables an optimal picture quality. This connection possibility requires a SCART cable (not included in your accessory).

Connection with video cable - The most widely used connection. An audio/video cable for composite video is required (not included in your accessory).

Connection with S-Video cable - A higher quality connection that requires a special S-Video cable (not included in your accessory) and a S-Video capable TV.

In detail:

Connection with SCART cable

If your TV has a SCART socket, you can optionally connect your DVD recorder with the TV over the SCART socket. The advantage is here an optimal picture quality.

Have the following cables ready:

3

1.Two aerial cables (not supplied)

2.Power cord (supplied)

3.SCART cable (not supplied)

1 Connect your antenna/cable TV outlet to the “ANTENNA IN” socket at the back side of your DVD recorder using an aerial cable.

Note:

If your TV is already connected to the antenna/cable TV outlet, remove the aerial cable plug from your TV and insert it into the “ANTENNA IN” socket at the back side of your DVD recorder.

2Insert one end of a second aerial cable into the “ANTENNA OUT” socket at the back of your DVD recorder and the other end into the aer-

ial input socket of your TV.

ANTENNA OUT

19