CyberHome Entertainment 1600 user manual Connecting Additional Devices, Best picture quality

CONNECTING ADDITIONAL DEVICES

EXT2 AUX

1 Connecting additional devices to the second SCART socket

DVD-PLAYER etc.	You can connect additional devices such as decoders, satellite receivers,
	DVB-T set-top boxes, DVD players, video recorders etc. to the “EXT2
	AUX” (SCART-2)socket. When playback on these additional devices is
	started, the DVD recorder automatically connects the “EXT2 AUX”
	(SCART-2) socket with the “EXT1 TO TV” (SCART-1) socket. You will
	then see the picture from the additional device on your TV.

Attention:

In order to see the picture from the additional device on your TV, you need to select the video input source “Video 1” or “S-Video”by pressing the button “SOURCE” on your remote control. If the picture is black and white, please switch the input source from SCART “Video 1” to SCART “S- Video”.

Note:

Most pre-recorded video cassettes and DVDs are copy-protected. You cannot copy them.

2 Connecting additional devices to the front sockets

	Video input sockets for connecting devices with composite video output or
	DV output, e.g. DVD player, video recorder, camcorder (video input source
	“Video 2” or “DV”). For easy copying camcorder recordings, please use
	the front sockets. These sockets are located on the right side of the front
	panel.
CAMCORDER	Best picture quality

DV IN

If you have a DV / Digital 8 camcorder, connect the “DV IN” input of the DVD recorder to the appropriate DV output on the camcorder. Use the but- ton “SOURCE” for selecting the video input source “DV”.

DVD-PLAYER etc.

LRV

VIDEO IN 2

L AUDIO IN R

Good picture quality

If you have a camcorder, DVD player, video recorder etc. that has a single video output (composite video, CVBS), connect the “VIDEO IN 2” input of the DVD recorder to the appropriate video output on the camcorder, DVD player or video recorder. You must also connect the audio input “L AUDIO IN R” on the DVD recorder to the audio output on the camcorder, DVD player or video recorder. Use the button “SOURCE” for selecting the video input source “Video 2”.

24