CyberHome Entertainment 1600 Using position markers Bookmark, Displaying disc information

PLAYING FUNCTIONS

POWER DISPLAY SETUP OPEN/CLOSE

TITLE	MENU	GOTO	BOOKMARK
	PBC
ANGLE	SUBTITLE	AUDIO	ZOOM
DIGEST

Mark Press and hold BOOKMARK key for bookmark menu

Using position markers (Bookmark)

The bookmark feature allows you to set markers on the disc. The disc will skip to the place marked. For example, you want to mark your favourite scene in a DVD movie to play back after the movie is finished. You can store up to 6 bookmark locations, which are cleared when the disc is removed. To set a marker, please follow these steps:

1 As a DVD, Video CD or CD is playing, press the button “BOOKMARK” on your remote control to store the current playback position as a book- mark. The video frame at this point (only with DVDs and Video CDs) will be captured and be added into bookmark list. At the same time there will appear an icon informing you that you need to press and hold the “BOOKMARK” button in order to access the bookmark menu and to display your set bookmarks.

Bookmark
CH/TT : 18/01
Time : 01:10:48
Press C to delete mark
01/02	27/04/2005 07:58:08

*DVD-Video disc display

2 After you have set all required bookmarks, press and hold the “BOOK- MARK” button. The bookmark menu appears on the screen. The cap- tured frames of each bookmark are listed on the bottom of the screen. Highlight the one you desire by pressing the direction buttons. Details of the stored playback position (chapter, title, track, time information) are displayed in the top left field of the screen.

3 Press “ENTER” to play the selected marker.

4 If you set the marker to the wrong point, you can delete it by pressing “C” on your remote control. Navigate to the marker which you want to delete using the direction buttons “B” and “A” and press “C”.

5 To exit the bookmark menu, please press the “BOOKMARK” key again.

Note:

The set bookmarks will be cleared after removing the disc.

01/10

21/30

1:20:30

English

English

Press Enter to select the title

Title 01

Title 02

Title 03

*DVD-Video disc display

Displaying disc information

Different playback information can be displayed on-screen by pressing the button “DISPLAY” on the remote control. In this way you will have quick access to playback information. You may also change the settings in the display menu.

1Press the “DISPLAY” button while a disc is playing. On the screen will

appear a menu (see figure on the left side). You can navigate to the set- tings by using the direction buttons “C” and “D”. Press the “ENTER”

button on your remote control to enter a menu point and select the required setting by pressing the buttons “C” and “D”.

44