CyberHome Entertainment 1600 user manual 12/04Tue1015 AM PR108 Off Once Done

PROGRAMMING A RECORDING (TIMER)

8 Switch off the DVD recorder with the button “STANDBY/ON” on the front of the device or with the button “POWER” on the remote control. The programmed recording will only function, if the DVD recorder remains in standby mode. If one or more recordings have been pro- grammed, “TIMER” will be displayed in red on the display of the DVD recorder provided the DVD recorder is in standby mode.

9 You may check the status of your recording later on. If the recording was successfully, “Done” will be displayed in the “Result” field. If it failed, “Failed” will be displayed. If you are checking the recording sta- tus during your recording by pressing “SCHEDULE”, “Run” will be dis- played in the “Result” field indicating that your timer recording is cur- rently running.

Recording
Audio/Video
Disc		Please make selection.
General
Help
		Edit	Delete		Cancel
Timer rec
Date	Start	Length	Source	Quality	VPS/	Repeat	Result
					PDC
12/04Tue10:15 AM 01:30			PR108	SP	Off	Once	Done

Editing/ deleting a programmed recording 1 Turn on the TV.

2 Switch on the DVD recorder and then press the button “SCHEDULE” on your remote control.

3 Select the programmed recording (timer) you want to check, change or delete by pressing the button “C” or “D”. Then press the button “ENTER” on your remote control.

4A further display appears on the screen asking you if you want to delete or edit your programmed recording.

5Highlight the field “Edit” and press the button “ENTER” to confirm your selection. Now you can edit the selected timer recording If your selec- tion is now correct, please press the button “ENTER” to confirm your current timer recording.

6If you want to delete the timer recording, please navigate to the field “Delete” with the direction button “A” and press “ENTER” to confirm.

7To cancel this operation select “Cancel” with the direction button and press “ENTER” on your remote control.

63