Installing Your DVD Recorder

Virgin mode

1 / 7

Before using your recorder, please complete this setup.

Select language	2 / 7
English
Deutsch
Français
Español
Choose ENTER OK RETURN	Back

Country setting	3 / 7
UK
Germany
France
Spain
Choose ENTER OK RETURN	Back

Subtitle setting	4 / 7
English
French
Spanish
German
Choose ENTER OK RETURN	Back

Initial installation

After successfully connecting your DVD recorder to your TV and other additional devices as described in the previous chapters, this chapter will show you how to process the initial installation. The DVD recorder auto- matically seeks out and stores all available TV channels.

Tips:

•Switching on additional devices: If you have connected additional devices such as a satellite receiver to the aerial cable, switch them on. The automatic channel search will recognise them and save them.

•No aerial connected: Even if you only want to use the DVD recorder to play back or have only connected a satellite receiver, you must still com- plete the initial installation. This is necessary so that the basic settings are stored correctly. Once the initial installation is completed you can use the DVD recorder normally.

1The initial installation menu will be displayed on the screen. A message will appear asking you to complete the initial setup (see illustration on the left). On the VFD display appears “PROCESS”. Please press the button “ENTER” on your remote control to start the initial installation.

2Select the desired language for the on-screen menu by pressing the direction button “C” or “D” on the remote control. Confirm with the but- ton “ENTER”.

What is an on-screen menu?

This DVD recorder has a multi-language on-screen menu. All settings respectively functions will be displayed in the corresponding language on the screen of your TV set.

3Select your country by pressing the direction button “C” or “D” on the remote control. Confirm with the button “ENTER”.

Why do I have to set the country?

To call up the specific settings for the respective country, you must first enter the country.

4 Select the desired subtitle language by pressing the direction button “C” or “D” on the remote control. Confirm with the button “ENTER”.

What is the subtitle language?

The subtitles will be displayed in the language you select, provided this language is available on the disc. If this language is not available on the disc, the first language on the DVD will be used instead.