Philips SBC RU 510 manual SET-UP for USE, To stop changing teletext pages, Red Green Yellow Blue

SHIFT

SHIF T

SHIF T

SHIF T

13

0 - 9

Instructions for use

To switch on teletext.
To enlarge the teletext display on screen.	English
To stop changing teletext pages.
To switch off teletext.
If you use the memory out key (fi) to access the next
teletext page on your Philips TV, see Troubleshooting.
Fasttext
Red
Green
Yellow
Blue

SET-UP FOR USE

A D V I C E

Carefully read the complete procedure before starting!

Your TV is a Philips brand: 1 Press the power key to test.

– The green LED lights up to confirm transmission.

C H E C K

Press a few keys to check correct response.

If response is not correct, go to the next paragraph.

Your TV is of another brand, or your TV is a Philips brand, but not all keys respond correctly:

1 Look up the brand name of the TV you want to operate in the code list (centre of this manual).

2 Make sure the TV is switched on.

3 Press and hold keys 1 and 3 simultaneously - for about three seconds- until the green LED lights up. (Release the keys: the green LED should stay on)

4 Enter your 4-digit code using the number keys, within

30seconds.

–The green LED flashes twice.

C H E C K

That’s it! Press a few keys to check correct response. If response is not correct, repeat procedure beginning at step 1, using the next 4-digit code in the codelist.

N O T E

-If the LED displays one long flash, the code was not recognised. Please go back to step 1 and repeat the procedure, using the next 4-digit code in the list.

-If no key is pressed within 30 seconds, you have to start again at step 1.

-If no correct code is in the list, go to the next paragraph.

3