Philips SCD589 user manual Preparing your baby monitor EN, Using your baby monitor

Preparing your baby monitor EN

Notes:

–Operation time will be 8 hours based on the assumption that the baby unit will be transmitting 25% of the time and is in standby mode for the rest of the time (baby does not any make sound).

–When the parent unit batteries are charged for the first time, operating time will be less than 8 hours.The batteries will use their maximum capacity after at least four times charging and discharging.

–Charging will take longer than 16 hours when the parent unit is switched on during charging.To shorten the charging time, the parent unit should be switched off.

➜The parent unit is now ready for use!

Using your baby monitor

Use this baby monitor for its intended houshold use as described in this manual.

1Place both units in the same room to test the connection. Make sure the baby unit is at least 1 meter / 3 feet away from the parent unit.

2Press and hold the On/Off (y) button (A-1) on the baby unit for 2 seconds.

>The night light (A-10) lights up briefly.

>The display light (A-11) lights up indicating the current room temperature.

>The LINK light (A-3) lights up red briefly then starts blinking green as

it seeks connection with the parent unit.If, after 30 seconds,no link is established, Owill appear on the display and the LINK light starts blinking red as it seeks connection with the parent unit.

3Press and hold the On/Off button (y) (B-6) on the parent unit for 2 seconds.

>The sound level lights (B-9) briefly light up orange.

>The display (B-8) lights up.The battery indicator ( ) and the room temperature light up in the display.

>The LINK light (B-3) lights up red briefly then starts blinking green as it seeks connection with the baby unit.

>The LINK light (B-3) on the parent unit blinks green and the LINK light (A-3) on the baby unit blinks red until connection has been

established.This will take up to 30 seconds. Both LINK lights (A-3, B-3) then light continously green and the message O will disappear from the baby unit display (A-11).

> 1 m / 3 feet

11