Philips SCD589 user manual Menu options EN, Adjusting microphone sensitivity

Menu options EN

Playing lullabies

To play or stop a lullaby:

•Select , using – and + (B-10). Confirm by pressing OK (B-7).

•Select :to replay the last played lullaby or < to stop playback. Confirm with OK (B-7).

To select a different lullaby:

•Select , using – and + (B-10). Confirm by pressing OK (B-7).

•Select ~, using – and + (B-10). Confirm by pressing OK (B-7).

•Select the desired lullaby, using – and + (B-10). Confirm by pressing OK (B-7).

Adjusting microphone sensitivity

You can set the sound sensitivity of the baby unit to the desired level.When set to the maximum sensitivity level all sounds (including your baby’s breathing, when loud enough) can be heard on the parent unit.You can only change the microphone sensitivity if the connection between the baby unit and the parent unit is established (when LINK lights (A-3, B-3) light continuously green).

•Select Z , using – and + (B-10). Confirm by pressing OK (B-7).

•Select the desired sensitivity level for the baby unit

microphone, using – and + (B-10). Confirm with OK (B-7). ZL = minimum level / lowest sensitivity; ZLLLLL= maximum level / highest

sensitivity

Note:When the sensitivity level of the baby unit is set to a high level, the unit will consume power because it is in continuous transmission mode.

Switching sound alert on and off

If sound alert is switched on, the parent unit beeps as soon as the fifth sound level light (B-9) lights orange while the volume is switched off.

•Select X, using – and + (B-10). Confirm with OK (B-7).

•Cor M. Confirm with OK (B-7).

17