|
| Frequently asked questions |
| EN |
Question |
| Answer |
| |
The technical specifications |
| The specified range is only valid outdoors in open air. Inside | ||
show an operating range of |
| your house the workable range is limited by the amount and | ||
300 meters / 900 feet outdoors. |
| type of walls and/or ceilings in between. Inside the house the | ||
How come my baby monitor |
| operating range will be up to 50 meters / 150 feet. | ||
manages much less than that? |
|
|
|
|
|
|
|
|
|
The link is lost every now and then, sound interruptions etc.
You are probably approaching the outer limits of the practical range.Try a different location or decrease the distance between the units slightly. Please note that it takes about
30 seconds each time before a new link between the units is established.
What happens during a power supply failure?
When batteries are installed in the both units, the units will automatically switch over to battery use in case of power supply failure.
Is my DECT baby monitor secure from eavesdropping and interference?
The 60 (for NA FCC / IC) channels guarantee no interference from other equipment.
Some buttons do not seem to work when I press them. What do I do wrong?
Except for the On/Off buttons
I place the parent unit in the charging base
Operating time of the parent unit batteries is supposed to be at least 8 hours. How come the battery operating time of my parent unit is less?
When the batteries of the parent unit are low, you have to wait for up to 20 minutes after placing the unit in the charger before the unit starts functioning.
When the parent unit batteries are charged for the first time, operating time will be less than 8 hours.The batteries will use their maximum capacity after at least four times charging and discharging.
Maybe the volume setting is too high.When the volume is set to a high level, the unit consumes more power. Set the volume to a lower level
Maybe the microphone sensitivity setting is too high.When the sensitivity is set to a high level, the units consumes more power. Set the sensitivity to a lower level
When the set maximum temperature is lower than the room temperature, the unit consumes more power because the display is continuously lit.This is also the case when the set minimum temperature is higher than the room temperature.
21