Philips SCD589 user manual EN Troubleshooting

EN Troubleshooting

Problem	Possible cause	Solution
High pitched noise.	Units are too close to each	Move parent unit away from baby
	other.	unit (at least 1 meter / 3 feet).
	Volume on parent unit	Decrease volume (B-10) on
	set too high.	parent unit.

No sound/	Volume on parent unit is
baby’s crying cannot	set too low or switched off.
be heard.

Increase volume on parent unit (B-10).

	Microphone sensitivity level	Increase microphone sensitivity
	set too low on parent unit.	level in parent unit menu.
	Units are out of range	Move parent unit closer to
		baby unit.
Parent unit reacts too	Ambient sounds trigger	Move baby unit closer to baby
fast to other ambient	transmission.	(keep minimal distance of 1 meter
sounds.		/ 3 feet).
	Microphone sensitivity level	Decrease microphone sensitivity
	set too high.	level in parent unit menu.
Battery check light ( )	Batteries are low or empty.	Replace / recharge batteries
lights up on the		(A-12, B-12).
display (A-11, B8).

Parent unit reacts slow/	Microphone sensitivity is set too
late to baby's crying.	low.

Increase microphone sensitivity level in parent unit menu and/or move baby unit closer to baby (keep minimal distance of 1 meter/ 3 feet).

Baby unit battery power	Microphone sensitivity is set	Set microphone sensitivity to a
diminishes rapidly.	too high.	lower level.
	The selected minimum/maximum	Select a lower/higher
	temperature higher/lower	minimum/maximum temperature.
	than room temperature.
	Volume setting too high.	Set volume to a lower level (A-4).

20