Invacare Adjustable ASBA Seat service manual EMI Information

Page 14

SECTION 3—EMI INFORMATION

SECTION 3—EMI INFORMATION

WARNING

CAUTION: IT IS VERY IMPORTANT THAT YOU READ THIS INFORMATION REGARDING THE POSSIBLE EFFECTS OF ELECTROMAGNETIC INTERFERENCE ON YOUR POWERED WHEELCHAIR.

Electromagnetic Interference (EMI) From Radio Wave Sources

Powered wheelchairs and motorized scooters (in this text, both will be referred to as powered wheelchairs) may be susceptible to electromagnetic interference (EMI), which is interfering electromagnetic energy (EM) emitted from sources such as radio stations, TV stations, amateur radio (HAM) transmitters, two way radios, and cellular phones. The interference (from radio wave sources) can cause the powered wheelchair to release its brakes, move by itself, or move in unintended directions. It can also permanently damage the powered wheelchair's control system. The intensity of the interfering EM energy can be measured in volts per metre (V/m). Each powered wheelchair can resist EMI up to a certain intensity. This is called its "immunity level." The higher the immunity level, the greater the protection. At this time, current technology is capable of achieving at least a 20 V/m immunity level, which would provide useful protection from the more common sources of radiated EMI.

There are a number of sources of relatively intense electromagnetic fields in the everyday environment. Some of these sources are obvious and easy to avoid. Others are not apparent and exposure is unavoidable. However, we believe that by following the warnings listed below, your risk to EMI will be minimized.

The sources of radiated EMI can be broadly classified into three types:

1)Hand-held Portable transceivers (transmitters-receivers with the antenna mounted directly on the transmitting unit. Examples include: citizens band (CB) radios, "walkie talkie", security, fire and police transceivers, cellular telephones, and other personal communication devices).

NOTE: Some cellular telephones and similar devices transmit signals while they are ON, even when not being used.

2)Medium-range mobile transceivers, such as those used in police cars, fire trucks, ambulances and taxis. These usually have the antenna mounted on the outside of the vehicle; and

3)Long-range transmitters and transceivers, such as commercial broadcast transmitters (radio and TV broadcast antenna towers) and amateur (HAM) radios.

NOTE: Other types of hand-held devices, such as cordless phones, laptop computers, AM/FM radios, TV sets, CD players, cassette players, and small appliances, such as elec- tric shavers and hair dryers, so far as we know, are not likely to cause EMI problems to your powered wheelchair.

Adjustable ASBA Seat

14

Part No 1143238

Image 14
Contents Adjustable Asba Seat Useful Terms Reference DocumentsTable of Contents Arms Adult Seats Junior Seats Signal Word Meaning Special NotesSpecial Notes All Wheelchairs with Trro Wheelchairs without Trro Label LocationsAll Wheelchairs Adjustable Asba Seat Typical Product ParametersOperation Information Repair or Service InformationGeneral Guidelines Weight Limitation Tire PressureSAFETY/HANDLING of Wheelchairs Pinch PointsEMI Information EMI Information Troubleshooting Safety INSPECTION/ TroubleshootingSafety Inspection Checklist Center Mount Footrests Removing Removing/Installing the Manual Center Mount FootrestInstalling Adjusting the Height of the Manual Center Mount Footrest Chairs built before 12/01/2008Chairs built after 12/01/2008 Adjusting the Angle of the Manual Center Mount Footrest Adjusting the Angle of the Manual Center Mount FootrestAdjusting the Footplate Angle Adjusting the Footplate Angle Chairs built before 12/01/2008Adjusting the Tension of the Flip Up Footplate PH904A, PHAL4A, 70 and PW93 Installing/Removing FootrestsFront Riggings PH904A and PHAL4A Front Riggings Adjusting the Footrest HeightTaper Adjusting the Footrest Height PW93 PW93Replacing Heel Loops Raising/Lowering Elevating Front RiggingsAdjusting/Replacing Telescoping Front Rigging Support Adjusting/Replacing Telescoping Front Rigging SupportInstalling Adjustable Angle Flip-up Footplate Hinge Installing Adjustable Angle Flip-up FootplatesAngle Adjustment Adjusting Adjustable Angle Flip-Up FootplatesDepth Adjustment Perpendicular and/or Inversion/Eversion AdjustmentReplacing Composite/Articulating Footplate Heel Loop CompositeInstalling/Removing Elevating Legrests 14 Installing/Removing Elevating LegrestsAdjusting Calfpads Raising/Lowering Elevating LegrestsInstalling the Power Elevating Legrests Power Elevating LegrestsInstalling/Removing the Power Elevating Legrests Adjusting the Footplate Adjusting the Power Elevating LegrestsRemoving the Power Elevating Legrests Adjusting the Footplate Depth Adjusting the Footplate Angle Adjusting the Calf Pad Adjusting the Calf Pad WidthAdjusting the Length for Power Legrest Adjusting the Calf Pad HeightRemoving/Installing the Power Elevating Legrest Harness Removing/Installing the Power Elevating Legrest Actuator Seat frame for clarityRight power Installing/Removing Flip Back Armrests ArmsPositioning Flip Back Armrests for User Transfer Adjusting Flip Back ArmrestsAdjusting Positioning Flip Back Armrests for UseInstalling/Removing the Cantilever Arms Installing/Removing the Cantilever ArmsAdjusting the Height of the Cantilever Arms Adjusting the Height of the Cantilever ArmsAdjusting the Angle of the Cantilever Arms Installing/Removing the Cantilever Arm ArmpadAdult Backs Removing/Installing the Contoura BackInstalling the Contoura Back Removing the Contoura BackInstalling the Mounting Hardware onto the Contoura Back Removing/Installing the Contoura BackAdjusting the Back Width Adjusting the Back AngleAdjusting the Back Height Removing/Installing the Back CanesRemoving/Installing the Spreader Bar Removing/Installing the Back CanesAdjusting Spreader Bar Width Removing/Installing the Spreader BarAdjusting Spreader Bar Width Junior Backs 100 Non- Trro Back Cane Bracket Mounting Holes Washer Screws Adjusting the Back Height Removing Spreader Bar Cover Mounting Screw Back Cane Tube Mounting Screws Removing/Installing the Seat Pan Adult SeatsAdjusting the Seat Width Side Rail Mounting Holes Adjusting the Seat Width Adjusting the Seat Depth Removing/Installing Side Rails Removing Side RailsInstalling Side Rails Removing/Installing Side RailsJunior Seats Junior Seats To be removed for this procedure To be removed for this Cross BAR Mounting Holes Hex Screw Rear Arm Socket Adjustment Table Inch Limited Warranty USA