Invacare Adjustable ASBA Seat service manual Adjusting the Calf Pad Width

Page 38

SECTION 7—POWER ELEVATING LEGRESTS

Adjusting the Calf Pad

Adjusting the Calf Pad Width

NOTE: For this procedure, refer to FIGURE 7.5.

1.Remove the two button head screws from the calf pad and calf pad bracket.

2.Reposition calf pad to calf pad bracket to desired mounting position.

3.Align button head screws to mounting holes on calf pad and calf pad bracket.

4.Install button head screws into calf pad bracket and calf pad. Securely tighten.

5.Repeat STEPS 1‐4 for opposite side if necessary.

Calf Pad Bracket

Back View

Mounting

Calf Pad

of Legrest

Holes

Mounting

Holes

Button

Head

Screws

Calf Pad

Calf Pad Bracket

Button

Head

Screws

Adjusting the Calf Pad Depth

NOTE: For this procedure, refer to

FIGURE 7.6.

1.Loosen, but DO NOT remove, hex screws.

2.Slide calf pad assembly up and out of the channel.

3.Remove the flat head socket screw, and locking hex nut that secure the calf bracket to the depth adjustment bracket.

4.Reposition the calf bracket on the depth adjustment bracket to desired position.

5.Install the flat head socket screw through the calf bracket, depth adjustment bracket and locking hex nut.

Flat Head

 

Socket

 

Channel

Screw

 

 

 

Locking

Depth

 

Adjustment

Hex

Holes

 

Nut

 

 

 

 

Depth

 

 

Adjustment

 

Hex

Bracket

Calf

Screws

 

 

 

Bracket

 

 

NOTE: Calf pad not shown for clarity.

FIGURE 7.6 Adjusting the Calf Pad Depth

6.Tighten locking hex nut to screw until snug. DO NOT overtighten nut or calf pad will not pivot properly.

Adjustable ASBA Seat

38

Part No 1143238

Image 38
Contents Adjustable Asba Seat Useful Terms Reference DocumentsTable of Contents Arms Adult Seats Junior Seats Signal Word Meaning Special NotesSpecial Notes All Wheelchairs with Trro Wheelchairs without Trro Label LocationsAll Wheelchairs Adjustable Asba Seat Typical Product ParametersOperation Information Repair or Service InformationGeneral Guidelines Weight Limitation Tire PressureSAFETY/HANDLING of Wheelchairs Pinch PointsEMI Information EMI Information Troubleshooting Safety INSPECTION/ TroubleshootingSafety Inspection Checklist Center Mount Footrests Removing Removing/Installing the Manual Center Mount FootrestInstalling Adjusting the Height of the Manual Center Mount Footrest Chairs built before 12/01/2008Chairs built after 12/01/2008 Adjusting the Angle of the Manual Center Mount Footrest Adjusting the Angle of the Manual Center Mount FootrestAdjusting the Footplate Angle Adjusting the Footplate Angle Chairs built before 12/01/2008Adjusting the Tension of the Flip Up Footplate PH904A, PHAL4A, 70 and PW93 Installing/Removing FootrestsFront Riggings PH904A and PHAL4A Front Riggings Adjusting the Footrest HeightTaper Adjusting the Footrest Height PW93 PW93Replacing Heel Loops Raising/Lowering Elevating Front RiggingsAdjusting/Replacing Telescoping Front Rigging Support Adjusting/Replacing Telescoping Front Rigging SupportInstalling Adjustable Angle Flip-up Footplate Hinge Installing Adjustable Angle Flip-up FootplatesAngle Adjustment Adjusting Adjustable Angle Flip-Up FootplatesDepth Adjustment Perpendicular and/or Inversion/Eversion AdjustmentReplacing Composite/Articulating Footplate Heel Loop CompositeInstalling/Removing Elevating Legrests 14 Installing/Removing Elevating LegrestsAdjusting Calfpads Raising/Lowering Elevating LegrestsInstalling the Power Elevating Legrests Power Elevating LegrestsInstalling/Removing the Power Elevating Legrests Adjusting the Footplate Adjusting the Power Elevating LegrestsRemoving the Power Elevating Legrests Adjusting the Footplate Depth Adjusting the Footplate Angle Adjusting the Calf Pad Adjusting the Calf Pad WidthAdjusting the Length for Power Legrest Adjusting the Calf Pad HeightRemoving/Installing the Power Elevating Legrest Harness Removing/Installing the Power Elevating Legrest Actuator Seat frame for clarityRight power Installing/Removing Flip Back Armrests ArmsPositioning Flip Back Armrests for User Transfer Adjusting Flip Back ArmrestsAdjusting Positioning Flip Back Armrests for UseInstalling/Removing the Cantilever Arms Installing/Removing the Cantilever ArmsAdjusting the Height of the Cantilever Arms Adjusting the Height of the Cantilever ArmsAdjusting the Angle of the Cantilever Arms Installing/Removing the Cantilever Arm ArmpadAdult Backs Removing/Installing the Contoura BackInstalling the Contoura Back Removing the Contoura BackInstalling the Mounting Hardware onto the Contoura Back Removing/Installing the Contoura BackAdjusting the Back Width Adjusting the Back AngleAdjusting the Back Height Removing/Installing the Back CanesRemoving/Installing the Spreader Bar Removing/Installing the Back CanesAdjusting Spreader Bar Width Removing/Installing the Spreader BarAdjusting Spreader Bar Width Junior Backs 100 Non- Trro Back Cane Bracket Mounting Holes Washer Screws Adjusting the Back Height Removing Spreader Bar Cover Mounting Screw Back Cane Tube Mounting Screws Removing/Installing the Seat Pan Adult SeatsAdjusting the Seat Width Side Rail Mounting Holes Adjusting the Seat Width Adjusting the Seat Depth Removing/Installing Side Rails Removing Side RailsInstalling Side Rails Removing/Installing Side RailsJunior Seats Junior Seats To be removed for this procedure To be removed for this Cross BAR Mounting Holes Hex Screw Rear Arm Socket Adjustment Table Inch Limited Warranty USA