Invacare Adjustable ASBA Seat service manual Installing/Removing the Cantilever Arms

SECTION 8—ARMS

Installing/Removing the Cantilever Arms

NOTE: For this procedure, refer to FIGURE 8.3.

NOTE: Reverse this procedure to remove the cantilever arm.

1.Insert the a flanged bearing into each side of the cantilever arm mounting tube.

2.Put the cantilever arm into place on the back cane mounting bracket.

3.Insert the pivot arm bushing into the cantilever arm mounting tube.

4.Attach the cantilever arm to the back cane mounting bracket with a socket head cap screw.

5.Adjust the angle of the cantilever arm to accommodate the user. Install the socket head cap screw through the slot in the cantilever arm mounting bracket and into the hole in the pivot arm bushing. Tighten the socket head cap screw.

6.Insert the socket head screw into the hole in the back cane mounting bracket. Tighten the socket head screw.

Cantilever Arm

Cantilever Arm

Mounting Tube

Socket Head Screw

Back Cane Mounting Bracket

	Pivot Arm Bushing
Flanged Bearings	Socket Head Cap Screw

Socket Head Screw

FIGURE 8.3 Installing/Removing the Cantilever Arms

Part No 1143238 45 Adjustable ASBA Seat