Invacare Adjustable ASBA Seat Safety INSPECTION/ Troubleshooting, Safety Inspection Checklist

SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING

SECTION 4—SAFETY INSPECTION/ TROUBLESHOOTING

Safety Inspection Checklist

NOTE: Initial adjustments should be made to suit the end userʹs personal body structure needs and preference. After initial setup, perform these procedures every time the wheelchair is serviced.

NOTE: Refer to the wheelchair base service manual for a complete safety inspection checklist for the base.

Inspect all fasteners.

Inspect TRRO/TRBKTS fasteners and hardware.

Ensure clothing guards are secure.

Arms are secure but easy to release and adjustment levers engage properly.

Adjustable height arms operate and lock securely.

Upholstery has no rips.

Armrest pad sits flush against arm tube.

Check that all labels are present and legible. Replace if necessary.

Clean upholstery and armrests.

Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary.

Inspect foam handgrips for damage. If damaged, have them replaced by a qualified technician.

Check that all labels are present and legible. Replace if necessary.

Inspect electrical components for signs of corrosion. Replace if corroded or damaged.

Troubleshooting

NOTE: Refer to the wheelchair base service manual and electronics manual for complete mechanical and electrical troubleshooting guides for the base and an explanation of error codes.

Adjustable ASBA Seat 16 Part No 1143238