Invacare Adjustable ASBA Seat service manual Spreader Bar Cover Mounting Screw Back Cane

SECTION 10—JUNIOR BACKS

Removing/Installing the Spreader Bar

NOTE: For this procedure, refer to FIGURE 10.4.

Removing

1.Remove the spreader bar cover.

2.Remove the two mounting screws securing the spreader bar to the back canes.

3.Remove the spreader bar from the back canes.

Installing

1.Position the spreader bar against the back canes.

2.Ensure the ends of the spreader bar are flush with the back canes.

3.Loosely install the two mounting screws to secure the spreader bar to the back canes. Torque to 75 in‐lbs ± 20%.

4.Install the spreader bar cover.

Spreader Bar

Cover

Spreader

Bar

Mounting

Screw

Mounting

Screw

Back Cane

FIGURE 10.4 Removing/Installing the Spreader Bar

Part No 1143238 59 Adjustable ASBA Seat