Operate NiteLite Electronics
ParautilizarloscomponenteselectrónicosNiteLite
FonctionnementdumoduleélectroniqueNiteLite
23 | 23A.The Lullaby NiteLite has (3) modes: |
SOUND:The SOUND ( ) position plays | |
| nature sounds.The SOUND ( ) |
| selection will cycle through 3 different |
| sounds for 10 minutes and go into |
| standby/sleep mode. MELODY:The |
| MELODY ( ) position (2) plays soothing |
| music.The MELODY ( )selection will cycle |
| through 5different songsfor 10 minutes |
| and go into standby/sleep mode. OFF:The |
| (OFF) position will turn OFF all electronics. |
| To prolong life of batteries, make sure the |
| power switch is in the OFF position when |
| not in use. |
With the switch in the MELODY (
) or SOUND (
) position you can activate the following.
VOLUME: To increase the sound, press the (
) side of the button.To decrease the sound, press the (
) side of the button.
VIBRATION: Push theVIBRATION (
) button once to activate vibration cycle and it will automatically turn off in 10 minutes.To immediately stop the vibration cycle, press theVIBRATION (
) button again. Note: When the LIGHT (
) button is pushed in the middle of the vibration cycle the light will turn off when the vibration cycle ends.
LIGHT: Push the LIGHT (
) button once to activate light cycle and it will automatically turn off in 10 minutes.To immediately stop the light cycle, press the LIGHT (
) button again. Note: When theVIBRATON (
) button is pushed in the middle of the light cycle the vibration will turn off when the light cycle ends.
MUSIC/FAST FORWARD: Push the MUSIC/FAST FORWARD ( 
/
) button once, it will move to the next melody/sound, play for the 10 minute cycle and stop. If you press and hold down the MUSIC/FAST FORWARD (
/
) button for 2 seconds, it will play the current melody/sound continuously for 5 minutes and stop.
35