SCE4430 17-09-2007 13:29 Pagina 4
4 Functional overview (fig. A)
1Power indicator Indicates the battery status.
2Battery check button Activates the power indicator.
3RESET
Resets the power pack to the factory default settings.
4INPUT 5V DC (mini USB) Connects to the mains supply.
5USB port
Connects to 5V DC devices (mobile telephones, MP3 players, etc.).
5 Operation
Charging the power pack (fig. B)
1Press the battery check button (2).
>One, two or three LEDs light up in the power indicator (1), indicating the current battery status. If all four LEDs light up, the battery is fully charged.
2Connect the retractable cable to the USB charger.
3Connect the mini USB connector tip to the other end of the retractable cable.
4Connect the mini USB connector tip to the rechargeable power pack.
5Connect the power plug of the USB charger to a wall outlet.
>The power indicator LEDs (1) will flash one after another, indicating that the battery is being charged.
>When all LEDs light continuously the battery is fully charged.
6Disconnect the battery pack from the AC power adapter and disconnect the AC power adapter from the wall outlet.
Note:
You can also charge the power pack via the USB output of your PC/notebook. Connect one side of the USB cable to the power pack (5V DC mini USB) and connect the other side of the retractable USB cable to the USB outlet of your PC/notebook.
Charging devices - preparation
1Check the maximum input voltage (V DC) of the device you wish to connect. For this see the user manual that came with the device.
2Make sure the device does not consume more current (mA) than 350 mA.
3Check what connector tip is required for your device. See the compatibility sheet for the proper tip for your device.
Charging 5V devices (fig. C)
1Insert the plug of the USB cable into the USB port (5).
2Connect the connector tip to the USB cable.
3Insert the connector tip into the power supply jack of the device.
>The device will now derive it’s power from the power pack.
>If the device has a charging indicator, it will indicate that the device is being charged.
Note:
If you are unable to solve a problem by following the above hints, try resetting the power pack by pressing RESET.The RESET button is recessed to prevent accidental reset of the power pack. Use a paperclip to gently press the RESET button (see fig. D).
Tip:
For several portable devices (5V), a USB connection cable is supplied with the original device (e.g. most MP3 players). In this case, you can also use this cable to charge your device.
ENGLISH
4