JVC TK-C655 manual Camera TITLE/ALARM Screen

Page 21

CAMERA TITLE/ALARM Screen

This screen sets items related to titles and alarms.

*This unit is not equipped with alarm input/output.

The item ALARM TITLE is used to set the alarm title, which is displayed when an alarm signal is input to the RM-P2580 remote control unit. (Please refer to the instruction manual for the RM-P2580.)

Item

Function & Setting

Initial Value

 

 

 

CAM. TITLE EDIT ..

This sets the title which is displayed permanently at the bottom left of the picture.

 

This title can be up to 16 characters in length.

 

 

P. 27, “CAMERA TITLE Setup”

 

 

 

 

AREA TITLE

The 360° panning range can be divided into 16 areas and a title, of up to 16-

OFF

 

character in length, can be set for each area. As the camera is panned manually

 

these area titles are displayed. This function determines whether area titles are

 

 

displayed or not.

 

 

ON : Display area titles.

 

 

OFF : Do not display area titles.

 

 

 

 

AREA TITLE EDIT ..

Sets the area titles.

 

 

P. 28, “AREA TITLE Setup”

 

 

 

ALM. TITLE SIZE

Sets the size of the characters in the alarm title. (Displayed when an alarm is acti-

DOUBLE

 

vated.)

 

 

NORMAL : Same size as the characters used in the menu screen.

 

 

DOUBLE : Double the size, both horizontally and vertically, of the characters used

 

 

in the menu screen.

 

 

 

 

ALM. TITLE COLOUR

Sets the colour of the alarm titles.

WHITE

 

Setting values: WHITE, YELLOW, CYAN, GREEN

 

 

 

ALARM TITLE EDIT ..

Sets the alarm titles.

 

P. 29, “ALARM TITLE Setup”

 

 

 

 

21

Image 21
Contents TK-C655 Important Safeguards Contents Features Provided AccessoriesSafety Precautions  Preset positions Precautions for Correct OperationCamera setups with which auto focusing may be difficult  Zooming Ceiling Mount Controls, Connectors and Indicators Ceiling Mount  Camera Switch settings P Multi-Drop Communication SystemCable connections P Memo Connector side of the Ceiling Mount Turn all the components power off before proceedingSwitch 7 OFF Switch 8 on Point-to-Point Communication SystemTwo wires must be connected Four wires must be connectedDuplex For example connection with an RM-P2580 Setting switches Switch SettingsMachine ID Camera ID check procedureBers on the RM-P2580 ExampleMake a 90 mm diameter hole in the ceiling Cable ConnectionsRemove the cover from the Ceiling Mount Pass the cables through the coverControl signal cables Attach the coverCoaxial cable Attach the drop prevention wire Attaching a safety wireAttaching the Ceiling Mount Attaching the CameraEnsure that the locking screw is loose Tighten the lock screw using a Phillips screwdriverFit the camera Rotate the cameraSetting the camera menus from an RM-P2580 Setup ProcedurePress and hold the Menu button for 3 seconds Press the SET buttonNormal screen Menu Screen FlowCamera Function Screen Camera TITLE/ALARM Screen Camera ALC/ExDR screen Camera Video Adjustment ScreenSense UP AGC ModePosition Function SET Screen Auto PAN/PATROL/TRACE ScreenFactory Settings screen Private Mask Setup Camera Title Setup Press the Tele buttonRepeat steps 5 and 6 for each title character Move the cursor to Area Title Edit and press the SET button Area Title SetupPress the FAR button Repeat steps 5 to 7 for each area titleAlarm Title Setup Display the Setup menu on the cameraRepeat steps 5 to 7 for each alarm title Auto PAN Setup Set the auto pan mode and speedAdjust the viewing angle of the start position Auto Patrol Setup Move the cursor to Autotrace SET and press the SET button Auto Trace SetupSet the patrol start position Auto Trace SET screen is displayedRepeat steps 5 to 7 for each title character Position Title SetupPosition Function SET screen Position Title screenClamp the Flush Mounted Ceiling Bracket Attaching a Flush Mounted Ceiling Bracket Optional WB-S575Ing Ceiling plateConnection Cables Attach the ceiling panelRemove the ceiling panel Removing a Flush Mounted Ceiling Bracket Optional WB-S575Remove the camera Check the release labels thoroughly before removalSymptom Cause Information Remedy TroubleshootingCamera SpecificationsPan/Tilt Mechanism GeneralDimensions in combination with the WB-S575 External dimensions Unit mmCeiling Mount hole WB-S575 Flush Mounted Ceiling Bracket + Ceiling panelTK-C655 Dome Type Camera