JVC TK-C655 manual Auto PAN/PATROL/TRACE Screen, Position Function SET Screen

Page 24

Setting Up the Camera Using an RM-P2580

AUTO PAN/PATROL/TRACE Screen

This screen sets up the auto pan function for slow panning, the auto patrol function for switching of positions in sequence, and the auto trace function for the reproduction of the results of manual camera operations.

Item			Function & Setting	Initial Value

AUTO PAN MODE	Determines movement during auto panning.			RETURN
	RETURN : Moves continuously between start and return positions.
	RIGHT	: Clockwise rotation
	LEFT	: Anti-clockwise rotation.
	☞ P. 30, “AUTO PAN Setup”

AUTO PAN SPEED	Sets the rotation speed during auto panning.			NORMAL
	LOW	: Low speed.
	NORMAL : Normal speed.
	HIGH	: High speed.

A. PAN START	Sets the auto panning start position.			–
POS. SET..

A. PAN RETURN	Sets the auto panning return position.			–
POS. SET..

AUTO PATROL SET	Sets the configuration of the auto patrol function.			–
	☞ P. 31, “AUTO PATROL Setup”

AUTO TRACE SET	Sets the configuration of the auto trace function.			–
	☞ P. 32, “AUTO TRACE Setup”

RM. A. PAN KEY	Determines the function activated by pressing the AUTO PAN button on the remote			A. PAN
	control unit.
	A. PAN		: Auto pan function.
	A. PATROL		: Auto patrol function.
	A. TRACE		: Auto trace function.

RM. A. PATROL KEY	Determines the function activated by pressing the AUTO PATROL button on the re-			A. PATROL
	mote control unit.
	A. PAN		: Auto pan function.
	A. PATROL		: Auto patrol function.
	A. TRACE		: Auto trace function.

POSITION FUNCTION SET Screen

This screen sets the configurations of functions relating to pictures taken in preset positions.

Item		Function & Setting	Initial Value

POSITION TITLE..	Sets the titles for the 99 preset positions and the home position. Titles can be up to		–
	16 characters in length and are shown in the display.
	☞ P. 33, “POSITION TITLE Setup”

IRIS MODE	Determines the lens iris adjustment mode.		AUTO
	AUTO	: for auto iris adjustment under standard conditions.
	AUTO+	: for auto iris adjustment under slightly brighter conditions.
	AUTO–	: for auto iris adjustment under slightly dimmer conditions.
	MANUAL	: for manual iris adjustment.

24

Image 24

Contents TK-C655 Important Safeguards Contents Features Provided AccessoriesSafety Precautions Precautions for Correct Operation Preset positionsCamera setups with which auto focusing may be difficult ZoomingControls, Connectors and Indicators Ceiling Mount Ceiling Mount Camera Switch settings P Multi-Drop Communication SystemCable connections P Memo Turn all the components power off before proceeding Connector side of the Ceiling MountSwitch 7 OFF Switch 8 on Point-to-Point Communication SystemFour wires must be connected Two wires must be connectedDuplex For example connection with an RM-P2580Switch Settings Setting switchesCamera ID check procedure Machine IDBers on the RM-P2580 ExampleCable Connections Make a 90 mm diameter hole in the ceilingRemove the cover from the Ceiling Mount Pass the cables through the coverControl signal cables Attach the coverCoaxial cable Attaching a safety wire Attach the drop prevention wireAttaching the Ceiling Mount Attaching the CameraTighten the lock screw using a Phillips screwdriver Ensure that the locking screw is looseFit the camera Rotate the cameraSetup Procedure Setting the camera menus from an RM-P2580Press and hold the Menu button for 3 seconds Press the SET buttonMenu Screen Flow Normal screenCamera Function Screen Camera TITLE/ALARM Screen Camera Video Adjustment Screen Camera ALC/ExDR screenAGC Mode Sense UPAuto PAN/PATROL/TRACE Screen Position Function SET ScreenFactory Settings screen Private Mask Setup Camera Title Setup Press the Tele buttonRepeat steps 5 and 6 for each title character Area Title Setup Move the cursor to Area Title Edit and press the SET buttonPress the FAR button Repeat steps 5 to 7 for each area titleAlarm Title Setup Display the Setup menu on the cameraRepeat steps 5 to 7 for each alarm title Auto PAN Setup Set the auto pan mode and speedAdjust the viewing angle of the start position Auto Patrol Setup Auto Trace Setup Move the cursor to Autotrace SET and press the SET buttonSet the patrol start position Auto Trace SET screen is displayedPosition Title Setup Repeat steps 5 to 7 for each title characterPosition Function SET screen Position Title screenAttaching a Flush Mounted Ceiling Bracket Optional WB-S575 Clamp the Flush Mounted Ceiling BracketIng Ceiling plateAttach the ceiling panel Connection CablesRemoving a Flush Mounted Ceiling Bracket Optional WB-S575 Remove the ceiling panelRemove the camera Check the release labels thoroughly before removalTroubleshooting Symptom Cause Information RemedySpecifications CameraPan/Tilt Mechanism GeneralExternal dimensions Unit mm Dimensions in combination with the WB-S575Ceiling Mount hole WB-S575 Flush Mounted Ceiling Bracket + Ceiling panelTK-C655 Dome Type Camera