Setting Up the Camera Using an
AUTO TRACE Setup
Use the AUTO TRACE screen to set the auto trace function, which stores and reproduces the actions of a manual camera opera-
tion (for 30 seconds).
MENU button
SET button
|
|
| REMOTE CONTROL UNIT | |||
SETUP |
| CAMERA | POSITION |
|
|
|
| POWER |
|
|
|
| |
MENU | SET | ALARM | AUTO | |||
KEY LOCK
Numeric keys
| LENS |
|
| CAMERA/POSITION | PAN/TILT | CAMERA | ||
| SPEED |
| 1 | 2 | 3 | CAMERA | POSI- | buttons |
|
|
|
|
|
|
| TION |
|
| IRIS |
| 4 | 5 | 6 | 1 | 2 |
|
CLOSE | OPEN |
|
|
| OPTION | OPTION | PAN/TILT | |
NEAR | FOCUS | FAR | 7 | 8 | 9 | AUTO | AUTO | |
AF | lever | |||||||
|
| PAN | PATROL |
| ||||
WIDE | ZOOM | TELECLEAR | 0 | ENTER |
|
|
| |
|
|
|
| /HOME |
|
|
|
|
ZOOM button |
| ENTER button |
| |||||
FOCUS button
1. Select the camera. ( ☞
CAMERA button → Numeric key (camera number) → ENTER button. The picture of the selected camera is output.
2. Display the SETUP menu on the camera. ( ☞ P. 18, steps 1 to 4 )
MENU button (3 sec.) → Select “CAMERA” with the PAN/TILT lever
→SET button.
The camera moves to the home position.
3. Tilt the PAN/TILT lever up or down to move the cur- sor (>) to “AUTO PAN/PATROL TRACE” and press the SET button.
The AUTO PAN/PATROL/TRACE menu is displayed.
– – – M E N U – – –
C A M . F U N C T I O N . .
C A M . T I T L E / A L A R M . .
C A M . V I D E O A D J U S T . . C A M . A L C / E x D R . .
H O M E M O T I O N D E T E C T . .
A U T O P A N / P A T R O L / T R A C E . . P O S I . F U N C T I O N S E T . .
F A C T O R Y S E T T I N G S . .
– – A U T O P A N / P A T R O L / T R A C E – –
A U T O P A N M O D E | R E T U R N | |
A U T O P A N S P E E D | N O R M A L | |
A . P A N S T A R T | P O S . S E T . . | |
A . P A N R E T U R N P O S . S E T . . | ||
A U T O P A T R O L | S E T . . | |
A U T O T R A C E S E T . . |
| |
R M A . P A N K E Y |
| A . P A N |
R M A . P A T R O L | K E Y A . P A T R O L | |
– – – A U T O T R A C E S E T – – –
P U S H S E T → L E A R N
– – – A U T O T R A C E S E T – – –
L E A R N I N G
4. Move the cursor (>) to “AUTOTRACE SET” and press the SET button.
The AUTO TRACE SET screen is displayed.
5. Set the patrol start position.
Using the PAN/TILT lever and the ZOOM and FOCUS buttons, set the camera position at which the auto trace function is to be started.
6. Press the SET button (to start memorization of man- ual camera operations).
•Auto trace starts. Operate the camera using the PAN/TILT lever, and the ZOOM and FOCUS buttons.
•The Auto trace function can memorize camera operations for up to 30 seconds, during this period “LEARNING” is displayed in the screen.
•Storage finishes automatically after 30 seconds.
•Srform step 7 only when finishing the storage but before 30 sec- onds elapses.
7.Press the SET button to end the memorization of manual camera operations.
•Auto trace ends and the screen returns to the AUTO PAN/PA- TROL/TRACE menu.
8.Press the MENU button.
•The screen returns to the AUTO PAN/PATROL/TRACE menu.
MEMO
●The PAN/TILT position in the item “AUTO TRACE” function can be set and operated only between 0° and 90° (it cannot be set and operated between 90° and 180°) even when the item “FLIP” is set to DIGITAL.
To let the camera execute reproduction of the auto trace operation, it is required to set the auto trace function in the AUTO PAN or AUTO TRACE button of the
☞P. 24, Items “RM. A. PAN KEY” and “RM. A. PATROL KEY”.
When the button to which the auto trace function is set is pressed, the lamp in the button lights up and auto trace reproduction starts.
The auto trace reproduction will repeat continually with a pause of 30 seconds between each operation.
To end the auto trace reproduction, press the button to which the auto trace function is set again so that the lamp in the button turns off.
32