JVC TK-C655 manual Contents

Page 3

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

AVERTISSEMENT:

POUR EVITER LES RISQUES D'INCENDIE OU D'ELECTROCUTION, NE PAS EXPOSER L'APPAREIL A L'HUMIDITE OU A LA PLUIE.

Thank you for purchasing this product. (These instructions are for TK-C655E)

Before beginning to operate this unit, please read the instruction manual carefully in order to make sure that the best possible performance is obtained.

Contents

 

Introduction

 

Features

4

Provided Accessories

4

Safety Precautions

5

Precautions for Correct Operation

5

Controls, Connectors and Indicators

6

Connections & Installation

 

A Multi-Drop Communication System

8

Point-to-Point Communication System

10

Switch Settings

12

Cable Connections

14

Attaching the Ceiling Mount

16

Attaching the Camera

16

Setting Up the Camera using an RM-P2580

 

Setup Procedure

18

Menu Screen Flow

19

CAMERA FUNCTION Screen

20

CAMERA TITLE/ALARM Screen

21

CAMERA VIDEO ADJUSTMENT Screen

22

CAMERA ALC/ExDR Screen

22

AUTO PAN/PATROL/TRACE Screen

24

POSITION FUNCTION SET Screen

24

FACTORY SETTINGS Screen

25

PRIVATE MASK Setup

26

CAMERA TITLE Setup

27

AREA TITLE Setup

28

ALARM TITLE Setup

29

AUTO PAN Setup

30

AUTO PATROL Setup

31

AUTO TRACE Setup

32

POSITION TITLE Setup

33

Other

 

Attaching a Flush Mounted Ceiling Bracket (Optional WB-S575)

34

Removing a Flush Mounted Ceiling Bracket (Optional WB-S575)

36

Troubleshooting

37

Specifications

38

3

Image 3
Contents TK-C655 Important Safeguards Contents Features Provided AccessoriesSafety Precautions  Zooming Precautions for Correct Operation Preset positions Camera setups with which auto focusing may be difficult Ceiling Mount Controls, Connectors and Indicators Ceiling Mount  Camera Switch settings P Multi-Drop Communication SystemCable connections P Memo Point-to-Point Communication System Turn all the components power off before proceedingConnector side of the Ceiling Mount Switch 7 OFF Switch 8 onFor example connection with an RM-P2580 Four wires must be connectedTwo wires must be connected Duplex Setting switches Switch SettingsExample Camera ID check procedureMachine ID Bers on the RM-P2580Pass the cables through the cover Cable ConnectionsMake a 90 mm diameter hole in the ceiling Remove the cover from the Ceiling MountControl signal cables Attach the coverCoaxial cable Attaching the Camera Attaching a safety wireAttach the drop prevention wire Attaching the Ceiling MountRotate the camera Tighten the lock screw using a Phillips screwdriverEnsure that the locking screw is loose Fit the cameraPress the SET button Setup ProcedureSetting the camera menus from an RM-P2580 Press and hold the Menu button for 3 secondsNormal screen Menu Screen FlowCamera Function Screen Camera TITLE/ALARM Screen Camera ALC/ExDR screen Camera Video Adjustment ScreenSense UP AGC ModePosition Function SET Screen Auto PAN/PATROL/TRACE ScreenFactory Settings screen Private Mask Setup Camera Title Setup Press the Tele buttonRepeat steps 5 and 6 for each title character Repeat steps 5 to 7 for each area title Area Title SetupMove the cursor to Area Title Edit and press the SET button Press the FAR buttonAlarm Title Setup Display the Setup menu on the cameraRepeat steps 5 to 7 for each alarm title Auto PAN Setup Set the auto pan mode and speedAdjust the viewing angle of the start position Auto Patrol Setup Auto Trace SET screen is displayed Auto Trace SetupMove the cursor to Autotrace SET and press the SET button Set the patrol start positionPosition Title screen Position Title SetupRepeat steps 5 to 7 for each title character Position Function SET screenCeiling plate Attaching a Flush Mounted Ceiling Bracket Optional WB-S575Clamp the Flush Mounted Ceiling Bracket IngConnection Cables Attach the ceiling panelCheck the release labels thoroughly before removal Removing a Flush Mounted Ceiling Bracket Optional WB-S575Remove the ceiling panel Remove the cameraSymptom Cause Information Remedy TroubleshootingGeneral SpecificationsCamera Pan/Tilt MechanismWB-S575 Flush Mounted Ceiling Bracket + Ceiling panel External dimensions Unit mmDimensions in combination with the WB-S575 Ceiling Mount holeTK-C655 Dome Type Camera