
Writing the RC Time code on a recorded tape
Escritura del código de tiempos RC en una cinta grabada
You can write the RC time code on a recorded tape. Use the Remote Commander.
(1) While pressing the small green button on the POWER switch, set it to VTR.
(2) Rewind the tape to the beginning and set the camcorder to playback pause mode.
(3) Press TIME CODE WRITE on the Remote Commander. The TIME CODE WRITE indicator appears in the viewfinder with the WRITE indicator flashing.
(4) Press áor P to start playback. The WRITE indicator stops flashing and the RC time code writing starts from 0:00:00:00.
1 POWER CAMERA
OFF
VTR
Es posible escribir el código de tiempos RC en una cinta grabada. Para ello, emplee el mando a distancia.
(1)Ajuste el interruptor POWER en VTR mientras pulsa el botón verde pequeña del interruptor.
(2)Rebobine la cinta hasta el principio y ajuste la videocámara en modo de pausa de reproducción.
(3)Pulse TIME CODE WRITE en el mando a distancia. El indicador TIME CODE WRITE aparecerá en el visor electrónico con el indicador WRITE parpadeando.
(4)Pulse áo Ppara iniciar la reproducción. El indicador WRITE dejará de parpadear y se iniciará la escritura del código de tiempos RC a partir de 0:00:00:00.
3 | TIME CODE |
|
WRITE | ||
|
| |
|
| TIMECODE |
|
| WRITE |
2 | REW 3 |
|
|
| 0 |
|
|
| PLAY PPAUSE | 4 | PLAY PPAUSE |
|
|
0:00:00:01
TIMECODE WRITE
To stop writing the RC time code
Press ¹ (or any tape transport button).
Para detener la escritura del código de tiempos RC
Pulse ¹ o cualquier tecla de transporte de cinta.
88