Configure the settings relating to the SD memory card [SD memory card]
Click the [SD memory card] tab on the "Basic setup" page. (☞ page 15) The settings relating to the SD memory card can be configured on this page.
■SD memory card setup
[SD memory card]
Select "Use" or "Not use" to determine whether or not to use the SD memory card.
Default: Not use
Important:
•Before removing the SD memory card from the cam- era, it is necessary to select "Not use" first.
•After inserting the SD memory card, it is necessary to select "Use" to use the SD memory card.
[Notification of remaining]
When the
Default: 50 %
Note:
Notification will be provided each time the remaining space of the SD memory card reached the values above.
For example, notification will be provided each time the remaining space reaches 50%, 20%, 10%, 5% and 2% when "50%" is selected. Notification may not always be made at the very moment when the remaining space of the SD memory card has reached each value.
[Save trigger]
Select a trigger to save images on the SD memory card from the following.
FTP error: Saves images when images have failed to transmit to the FTP server by the FTP periodic trans- mission function.
Alarm input: Saves images at an alarm occurrence.
Manual: Saves images manually. (☞ page 10)
Default: FTP error
Notes:
•Select "FTP error" when images are to be transmit- ted to the FTP server at an alarm occurrence.
•When using the DHCP function (☞ page 58), images will not be saved on the SD memory card until an IP address is assigned regardless of the "Save trigger" setting.
[Overwrite]
Determine whether or not to overwrite when the SD memory card becomes full.
This setting is available only when "Manual" is selected for "Save trigger".
ON: Overwrites when the SD memory card becomes full. (The oldest image is the first to be overwritten.)
OFF: Stops saving images on the SD memory card when the SD memory card becomes full.
Default: OFF
Note:
The overwrite setting will be as follows according to the "Save trigger" setting.
FTP error: Will not be overwritten
Alarm input: Will be overwritten
Manual: Can be determined by selecting "ON" or "OFF" for "Overwrite"
[File name]
Enter the file name used for the image to be saved on the SD memory card. The file name will be as follow. File name: ["Entered file name" + "Time and date
(year/month/day/hour/minute/second)"] + "Serial number"
Number of characters that can be entered for the file
name: 1 - 8 characters
22