Panasonic WV-NS202 Audio output volume PC to Camera, Audio output port PC to Camera

[Audio output volume (PC to Camera)]

Select a volume level on the camera to hear audio transmitted from the PC.

Low/Middle/High

Default: Middle

[Audio output interval (PC to Camera)]

Select an interval for audio transmission from the follow- ing.

160 msec/320 msec/640 msec/1 280 msec Default: 640 msec

Notes:

•When a shorter interval is selected, the delay time will be shorter. When a longer interval is selected, audio interruption may be diminished even though the delay time will be longer.

Select the interval according to the network environ- ment.

•Audio may temporarily be interrupted or noise may be heard when panning, tilting or zooming the cam- era, or when multiple users are accessing concur- rently. It may be possible to diminish the interruption or noise by setting a longer interval for "Audio output interval (PC to Camera)".

[Audio output port (PC to Camera)]

Enter the transmission port number (the port number on the camera used to receive audio data transmitted from the PC).

Available port number: 1024 - 50000 (Only even num- bers are available.)

Default: 34004

Note:

The transmission port number entered for "Audio output port (PC to Camera)" will be used only when "Unicast (MANUAL)" is selected for "Transmission type" (☞ page 27).

When "OFF" is selected for "MPEG-4 transmission" (☞ page 27) or when "Unicast (AUTO)" or "Multicast" is selected for "Transmission type", it is not necessary to enter the transmission port num- ber.

[Authentication]

Select an access level for audio transmission/reception from the following. Refer to page 54 for further informa- tion about the access level.

Level 1 only/Level 2 or higher/All users Default: All users

Notes:

•Images and audio will not be synchronized. Therefore, images and audio may not always match.

•Audio may be interrupted depending on the network environment.

41