Upgrade the firmware [Upgrade]
Click the [Upgrade] tab of the "Maintenance" page. (☞ page 15)
The current firmware can be checked and upgraded to the latest version on this page. Contact the dealer for further information about the firmware upgrade.
[Model No.], [MAC address], [Serial number], [Firmware version], [IPL version], [Installation frequency of Viewer software]
Information of each item will be displayed.
How to upgrade the firmware
Step 1
Contact the dealer and download the latest firmware onto a PC.
Important:
A blank (space) cannot be used for the name of the directory where the downloaded firmware to be saved.
Step 2
Click the [Browse…] button and designate the down- loaded firmware.
Step 3
Click the radio button respective to the desired option to determine whether or not to initialize the settings after completing the firmware upgrade.
Step 4
Click the [Upgrade] button.
→The confirmation window will be displayed. When "Do not default settings after completing the upgrade." is selected, the confirmation window will not be displayed.
After completing the upgrade, delete temporary inter- net files. (☞ page 77)
Important:
•Upgrade the firmware using a PC in the same sub- net as the camera.
•Follow the instructions from the dealer when upgrad- ing the firmware.
•Use the designated file (extension:img) for the firmware upgrade.
•The name of the firmware to be used for the upgrade should be "ns202_xxxxx.img". ("xxxxx" indi- cates the version of the firmware.)
•Do not turn off the power of the camera during the upgrade process.
•Do not operate the web browser (including adjusting the window size) during the upgrade process.
•The following network settings will not be initialized when upgrading the firmware after selecting "Resets to default setting after completing the upgrade. (Except network settings)".
ON/OFF for DHCP, IP address, net mask, default gateway, HTTP port, ON/OFF for DNS, AUTO/MAN- UAL for DNS, DNS primary and secondary address- es, line speed, total bit rate, time & date
•The viewer software used on each PC should be licensed individually. Refer to your dealer for the software licensing.
Note:
Read the "readme" file provided with the firmware first and determine whether or not to initialize the settings after the firmware upgrade.
67