Configure the settings relating to SNMP [SNMP]
Click the [SNMP] tab on the "Network setup" page. (☞ page 15)
The settings relating to SNMP can be configured on this page. It is possible to check the status of the camera by connecting to the SNMP manager. When using the SNMP function, contact the network administrator.
[Contact (Destination address or phone number of manager)]
Enter the mail address or the phone number of the
SNMP manager.
Number of characters for "Contact": 0 - 255 charac-
ters
Default: None (blank)
[Community name]
Enter the community name to be monitored.
Number of characters for the community name:
0 - 32 characters Default: None (blank)
Important:
When using the SNMP function, it is necessary to enter the community name. When no community name is entered, the SNMP function will not work.
[Camera title]
Enter a camera title to be used to manage the camera with the SNMP function.
Number of characters for the camera title: 0 - 32
characters Default: None (blank)
[Camera location]
Enter the name of the location where the camera is installed.
Number of characters for the camera location: 0 - 32
characters Default: None (blank)
62