[Default gateway]
When not using the DHCP function, enter the default gateway of the camera.
Default: 192.168.0.1
<Unavailable IP addresses for the default gate- way>
0.*.*.* *.*.*.0
255.*.*.* *.*.*.255 127.0.0.1
Class D addresses (224.0.0.0 - 239.255.255.255) Class E addresses (240.0.0.0 - 255.255.255.255)
Note:
These IP addresses for the default gateway are unavailable even when using the DHCP function. Refer to the network administrator for further infor- mation about the settings of the DHCP server.
[HTTP port]
Assign the port numbers independently.
The following port numbers are unavailable since they are already in use.
Available port number: 1 - 65535
Default: 80
<Port numbers already in use>
20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161, 162, 995, 10669, 10670
[DNS]
Select "AUTO" or "MANUAL" to determine whether or not to use the DNS. When "MANUAL" is selected, it is necessary to configure the settings for the DNS.
When using the DHCP function, it is possible to obtain the DNS address automatically by selecting "AUTO". Refer to the network administrator for further information about the settings.
Default: MANUAL
[Primary DNS], [Secondary DNS]
When "MANUAL" is selected for "DNS", enter the IP address of the DNS. Refer to the network administrator about the IP address of the DNS.
[Line speed]
Select the line speed for data transmission from the fol- lowing. It is recommended to use the default setting "AUTO".
AUTO: Line speed will be applied automatically.
Default: AUTO
[FTP access]
Select "Allow" or "Forbid" to determine whether to allow or forbid the FTP access.
Default: Forbid
[Total bit rate]
Select the total bit rate for data transmission from the following.
Unlimited/64 kbps/128 kbps/256 kbps/512 kbps/1024 kbps/2048 kbps/4096 kbps
Default: Unlimited
Notes:
•When selecting "64 kbps", select "OFF" for "Audio mode" on the "Audio" tab. (☞ page 40)
•When "64 kbps" is selected, it is impossible to carry out the live transmission of JPEG images and the FTP periodic transmission simultaneously.
59