Configure the settings relating to the camera action at an alarm occurrence
Click the [Alarm] tab on the "Alarm setup" page. (☞ page 15)
■Camera motion on alarm
The settings relating to the camera action at an alarm occurrence can be configured in this section. Refer to pages 43, 46 and 47 for further information about the settings relating to the alarm, the alarm image and the alarm output terminal.
[Terminal alarm 1]
Select an action to be taken when a terminal alarm 1 is detected from the following.
OFF: Does not take any action even when a terminal alarm 1 is detected.
Auto track: When a terminal alarm 1 is detected, the camera will move to the home position and start the auto tracking.
Alarm permission: Receives a terminal alarm 2 and 3 while detecting a terminal alarm 1.
VMD permission: Permits to detect video motion (VMD function) while detecting a terminal alarm 1.
Access permission: Permits access from all the users registered on the "User" page (☞ page 54) while detecting a terminal alarm1. Permits access from users whose access level is "1" while no detecting a terminal alarm 1.
Default: OFF
Important:
When "Access permission" is selected for "Terminal alarm 1", select "ON" for "User authentication" on the [Authentication] tab (☞ page 54).
[Terminal alarm 2]
Select an action to be taken when a terminal alarm 2 is detected from the following.
OFF: Does not take any action even when a terminal alarm 2 is detected.
Auto track: When a terminal alarm 2 is detected, the camera will move to the home position and start the auto tracking.
Default: OFF
[Terminal alarm 3]
Select an action to be taken when a terminal alarm 3 is detected from the following.
OFF: Does not take any action even when a terminal alarm 3 is detected.
Auto track: When a terminal alarm 3 is detected, the camera will move to the home position and start the auto tracking.
Default: OFF
"AUX" is the terminal that can be switched between "OPEN" and CLOSE" from the "Live" page. It is useful when controlling the connected external device. For example, when it is necessary to control lighting at the camera location, connect a lighting control device to the terminal (AUX OUT) of the camera to remotely control lighting at the camera location.
[VMD alarm]
Select an action to be taken when a VMD alarm is detected from the following.
OFF: Does not take any action even when a VMD alarm is detected.
44