Panasonic WV-NS202 Error indications relating to Ddns, Error indications relating to NTP

Page 70

Error indications relating to DDNS

Category

Indication

Description

Connection error

No response from the server

• The designated IP address of the DDNS

 

 

may be incorrect. Check if the DDNS set-

 

 

tings are configured correctly.

 

 

• The DDNS server may be down. Ask the

 

 

network administrator.

 

 

 

 

Password error for the entered user name

Entered user name or password may be

 

 

incorrect. Check if the DDNS settings are

 

 

configured correctly.

 

 

 

 

IP address updated error

IP address update error occurred in the

 

 

DDNS server. Ask the network administrator.

 

 

 

Internal error

Other error

An error occurred in the DDNS function.

 

 

Check if the DDNS settings are configured

 

 

correctly.

 

 

 

Error indications relating to NTP

Category

Indication

Description

Connection error

No response from the server

The IP address of the server may be

 

 

 

incorrect. Check if the IP address of the

 

 

 

server is configured correctly.

 

 

• The NTP server may be down. Ask the

 

 

 

network administrator.

 

 

 

 

Internal error

Other error

The designated IP address of the DNS

 

 

 

may be incorrect. Check if the DNS set-

 

 

 

tings are configured correctly.

 

 

• The DNS server may be down. Ask the

 

 

 

network administrator.

 

 

 

Time adjustment

Auto time adjustment succeeded.

Time correction succeeded.

synchronizing with NTP

 

 

 

succeeded.

 

 

 

 

 

 

 

70

Image 70
Contents Network Operating Instructions Contents Trademarks and Registered Trademarks PrefaceAbout these operating instructions Viewer SoftwareStep Monitor Images on a PCMonitor images from a single camera Refresh interval MPEG-4About the Live Zoom buttons *2 0AUTO Mode *2SD button manual SD recording button *2 Focus buttons *22BRIGHTNESS buttons *2 3PRESET *21Control pad/buttons *2 4Camera titleAudio output button *3 @ SD recording status indicator@1Main area *2 Monitor images from multiple cameras Record images on the SD memory card manually Action at an alarm occurrence Action at an Alarm OccurrenceAlarm type Notify of alarm occurrences by e-mailTransmit images onto an FTP server Save images on the SD memory card SD memory card UseAbout the network security of the camera Access restrictions by changing the Http portEquipped security functions How to display the setup menu How to operate the setup menu About the setup menu window 2Setup Network setup buttonMaintenance button Help buttonConfigure the basic settings of the camera Basic setup Configure the basic settings BasicAlarm status port Alarm status update modeDefault Real time Default onConfigure the settings relating to the NTP server NTP SD memory card setup SD memory card information Step Image capture size VGA Image capture size QvgaDefault 5 fps Jpeg setupDefault VGA Image quality Refresh interval JpegDefault 3 sec Transmission type MPEG-4 setupDefault Normal Refresh interval MPEG-4 MPEG-4 transmissionDefault Multicast TTL Default Unicast port2 AudioDefault Multicast address Available value 1 DefaultCamera title on screen Default OFF Camera title on screen 0-9, A-ZDefault 1 min Image Hold Home positionPan·Tilt degree/Zoom ratio display Upside-downTilt Angle Auto Pan Image AdjustPreset Position Privacy ZoneSuper Dynamic About SUPER-D 3 Super Dynamic functionDefault ATW1 Default AutoDefault on High Sensitivity up Mask areaAperture level Default High Chroma gain levelDNR Digital Noise Reduction Pedestal levelSet mask areas Preset ID Preset NoPosition No Default OFF Mask area Preset ID 0-9, A-ZNumber of characters for the preset ID 0 16 char Auto focusPosition Auto panMode Zone settingPrivacy zone Zone selectConfigure the settings relating to audio Audio Authentication Audio output volume PC to CameraDefault Middle Audio output interval PC to Camera Audio output port PC to CameraIP address Configures the multi-screen settings Multi-screen setupNumber of characters for the IP address 1 Configure the settings relating to the alarm Alarm Configure the alarm settings Alarm setupAlarm setup Camera motion on alarm Default OFF Command alarm Configure the settings relating to the alarm image Alarm image setupAlarm output terminal setup Configure the settings relating to the alarm out connectorAUX name Set the VMD areas VMD area Default Middle Default OFF Detection sensitivityStatus Set the VMD areas for each preset position Delete the VMD area set for the designated preset position Default Middle StepMail notification setup Panasonic alarm protocol setup Configure the settings relating to Panasonic alarm protocolPanasonic alarm protocol Password Retype password User authenticationDefault OFF User name Number of characters for the password 4 32 charHost authentication Default OFF Access levelConfigure the settings of the servers Server setup Configure the settings relating to the mail server MailDefault Passive FTP server address Configure the settings relating to the FTP server FTPFTP mode Number of characters for the FTP server addressConfigure the network settings Network Configuring the network settings Network setupNetwork setup Available port number 1 Default Port numbers already in use Default gatewayUnavailable IP addresses for the default gate- way Default Manual Primary DNS, Secondary DNSWAN Default OFF Host name Configure the settings relating to Ddns DdnsAccess interval Number of characters for the host name 1 64 charConfigure the settings relating to Snmp Snmp FTP periodic transmission Default OFF DirectoryFTP periodic transmission Number of characters for the directory name 0How to configure the schedule settings Schedule setupInterval How to delete the set schedule Check the system log System log Maintenance of the camera MaintenanceError message Time & dateUpgrade the firmware Upgrade How to upgrade the firmwareInitialize Html data Initialize setup data and Html dataInitialize/restart the camera Initialization RestartAbout the displayed system log Error indications relating to SmtpError indications relating to FTP Category Indication DescriptionError indications relating to Ddns Error indications relating to NTPTroubleshooting Cause/solutionSymptom Symptom Symptom Symptom Cause/solution Reference Pages Solutions Reference Pages Directory Structure of Drive B FTPN0706-1096 3TR004483BAA
Related manuals
Manual 3 pages 60.95 Kb