Set the VMD areas [VMD area]
Click the [VMD area] tab on the "Alarm setup" page. (☞ page 15) The video motion detection areas can be set on this page.
The VMD areas can be set for each preset position (up to 64 areas). When motion is detected in the set area, the alarm action will be performed. The camera can be configured to take an alarm action even when the camera is not at the preset position.
Important:
•Areas used for the time and date display of "OSD position" (☞ page 20) cannot be used for the VMD areas.
Areas used for the time and date display of "OSD position"
•It is possible to display the alarm occurrence indication button on the [VMD area] tab when motion is detected by the VMD function. Select "ON" for "VMD alarm" on the [Alarm] tab when the alarm occurrence indication button is to be displayed.
•The alarm occurrence indication button will be displayed when receiving an alarm input of a terminal alarm or a command alarm.
•Depending on the network environment, notification may be delayed even when "Real time" is selected for "Alarm status update mode" on the [Basic] tab of the "Basic setup" page (☞ page 20).
48