Set the VMD areas for each preset position
Set the VMD areas for each preset position
Important:
•The VMD function will be carried out only when the camera is at the preset position.
•When the settings are being configured on the setup menu, sometimes the VMD function may not work correctly.
Step 1 | Step 3 |
Select a preset position number to which the VMD area is to be set from "Preset position select" of "VMD area setting for Preset position".
Set the video motion detection area by dragging the mouse on the screen.
When the [All areas] button is clicked, the whole area will become the VMD area and set as area 1 (white).
→The designated area will become the VMD area and the outline will be displayed. When 2 - 4 VMD areas are set, each area will be numbered in order. The areas will be identified by the respective outline col- ors.
Step 2
Click the [Setup] button.
→ The VMD area setup window for the selected preset position number will be displayed.
Important:
The position selected for "OSD position" will not be applied to the VMD area.
Step 4
Select "ON" or "OFF" for "Status" of each VMD area. When the [SET] button is clicked after selecting "OFF", the outline will become a broken line and no alarm action will be performed even when motion is detected in the area.
50