Panasonic WV-NS202 Upside-down, Pan·Tilt degree/Zoom ratio display, Tilt Angle

[Upside-down]

Select "ON (desktop)" or "OFF (ceiling)" to determine how the camera is to be installed.

ON (desktop): Select this when the camera is to be installed with the dome side up.

OFF (ceiling): Select this when the camera is to be installed with the dome side down.

Default: OFF (ceiling)

[EL-ZOOM]

Select "ON" or "OFF" to determine whether or not to use the electronic zoom.

ON (Max X10): Images can be zoomed in on with the optical zoom (1x - 22 x) and the electronic zoom (23x – 220x).

OFF: Does not use the electronic zoom.

Default: OFF

Notes:

•When "ON" is selected, zooming will stop when the zoom factor has reached 22x.

•When the zoom factor is increased to 22x (EL-zoom) or more, the image resolution will be lower.

•When the zoom factor is 22x or more, the setting of the preset positions will become unavailable.

[Pan·Tilt degree/Zoom ratio display]

Select "ON" or "OFF" to determine whether or not to dis- play the current panning/tilting degree and the zoom factor on images when the camera is being operated manually.

ON: Displays the current panning/tilting degree and the zoom factor.

OFF: Does not display the current panning/tilting degree and the zoom factor.

Default: ON

Note:

When "ON" is selected, the panning/tilting degree and the zoom factor will be displayed at the position selected for "OSD Position" on the [Basic] tab of the "Basic setup" page. (☞ page 20)

[Tilt Angle]

Select the maximum degree for tilting from the following. (Level = 0°)

0°/–5°/–10°/–15°/–20°/–25°/–30°

Default: 0°

30