Configure the settings relating to the alarm image
Click the [Alarm] tab on the "Alarm setup" page. (☞ page 15)
■Alarm image setup
The settings relating to the alarm image to be transmitted to an FTP server can be configured in this section. The alarm image will be transmitted to an FTP server. To transmit alarm images to an FTP server, it is necessary to con- figure the settings in advance. (☞ page 57)
Refer to pages 43, 44 and 47 for further information about the settings relating to the alarm, the camera action at an alarm occurrence and the alarm output terminal.
Important:
•Depending on the network line speed or the network traffic, images may not be transmitted at the exact designat- ed interval or period.
•When "Alarm input" or "Manual" is selected for "Save trigger" on the [SD memory card] tab, images will not be transmitted to the FTP server even when an alarm is detected. (☞ page 22)
[To FTP setup]
When "To FTP setup" is clicked, the [FTP] tab of the "Server setup" page will be displayed. (☞ page 57)
[Alarm image FTP transmission]
Select "ON" or "OFF" to determine whether or not to transmit the alarm image to the FTP server. Default: OFF
[Directory]
Enter the directory name where the alarm images are to be saved.
For example, enter "/ALARM" to designate the directory "ALARM" under the root directory of the FTP server. Number of characters for the directory name: 0 - 256
characters
[File name]
Enter the file name used for the alarm image to be transmitted to an FTP server. The file name will be as follows.
File name: ["Entered file name" + "Time and date (year/month/day/hour/minute/second)"] + "Serial number"
Number of characters for the file name: 1 - 32 char-
acters
[Post alarm]
•Transmission interval
Select the transmission interval for the alarm image transmission to the FTP server from the following. 0.1 fps/0.2 fps/0.33 fps/0.5 fps/1 fps
Default: 1 fps
•Number of images
Select the number of images to be transmitted from the following.
10 pics/20 pics/ 30 pics/50 pics/100 pics/200 pics/
300 pics/500 pics/1000 pics/2000 pics/
3000 pics/5000 pics Default: 100 pics
•Recording duration
Approximate time to be taken to save the set "num- ber of images" with the set "transmission interval" will be displayed.
[Image capture size]
Select "QVGA" or "VGA" for the image capture size of images to be transmitted to the FTP server or of an image to be attached to the alarm mail.
Default: VGA
46